Visit ECU Homepage
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
Please note that there may be some modifications to the assessment schedule promoted in Handbook for Semester 1 2023 Units. All assessment changes will be published by 20th February 2023. All students are reminded to check the handbook at the beginning of semester to ensure they have the correct outline.
This unit of competency specifies the mandatory work health and safety training required prior to undertaking construction work. The unit requires the person to demonstrate personal awareness and knowledge of health and safety legislative requirements in order to work safely and prevent injury or harm to self and others. It covers identifying and orally reporting common construction hazards, understanding basic risk control measures, and identifying procedures for responding to potential incidents and emergencies. It also covers correctly selecting and fitting common personal protective equipment (PPE) used for construction work. This unit meets the general construction induction training requirements of: Part 1.1 Definitions and Part 6.5 of the Model Work Health and Safety Regulations; Division 11 of Part 3 of the Occupational Safety and Health Regulations 1996 for Western Australia; and Division 3 of Part 5.1 of the Occupational Health and Safety Regulations 2007 for Victoria. It is expected that site-specific induction training will be conducted prior to conducting construction work. Licensing, legislative, regulatory or certification requirements apply to this unit. Relevant work health and safety state and territory regulatory authorities should be consulted to confirm jurisdictional requirements.
Students will attend on campus classes as well as engage in learning activities through ECU's LMS
| Joondalup | Mount Lawley | South West (Bunbury) | |
|---|---|---|---|
| Semester 1 | Not Offered | 10 x 2.5 hour lecture | Not Offered |
| Semester 2 | Not Offered | 5 x 2.5 hour lecture | Not Offered |
For more information see the Semester Timetable
A person demonstrating competency in this unit must satisfy the requirements of the elements, performance criteria, foundation skills, and range of conditions of this unit, in addition to the specific performance and knowledge evidence described below. The person must: identify and orally report two construction hazards orally explain how risk could be reduced or removed in relation to those two hazards select appropriate personal protective equipment (PPE) to control the risk orally explain basic procedures for responding to incidents and emergencies, including types and purpose of the following fire safety equipment: fire blankets fire extinguishers, including water, carbon dioxide, powder and foam hose reels and mains identify and orally explain the meaning of required safety signs and symbols orally explain the purpose of job safety analyses (JSAs), safe work method statements (SWMS) and safety data sheets (SDS) orally explain the roles of the following designated health and safety personnel: first aid officers work health and safety representatives work health and safety committee members supervisors. The person must also demonstrate correctly fitting to themselves the PPE listed below: eye protection hearing protection hard hat high visibility retro reflective vest.
The following must be present and available to learners during assessment activities: equipment: all of the PPE listed in the performance evidence specifications: state or territory Act relevant to the location of the learner, as specified in the range of conditions. The assessment of performance evidence must be done by direct observation of the learner by an assessor, either by an assessor observing the learner physically and/or by an assessor observing the learner via audio and visual media in real time. Assessor requirements As a minimum, assessors must satisfy the assessor requirements in the Standards for Registered Training Organisations (RTOs) current at the time of assessment. Assessors must hold the unit CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry, or its successor.
GS5 VET GRADING SCHEMA Used for WAAPA VET only
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Students please note: The marks and grades received by students on assessments may be subject to further moderation. Informal vivas may be conducted as part of an assessment task, where staff require further information to confirm the learning outcomes have been met. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work as well as any generative artificial intelligence tools that may have been used. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.
Breaches of academic integrity can include:
Copying the words, ideas or creative works of other people or generative artificial intelligence tools, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).
Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).
Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.
Using or having access to unauthorised materials in an exam or test.
Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.
ECU's policies and more information about academic integrity can be found on the student academic integrity website.
All commencing ECU students are required to complete the Academic Integrity Module.
In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.
Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.
CPCCWHS1001|1|1
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
This unit of competency specifies the mandatory work health and safety training required prior to undertaking construction work. The unit requires the person to demonstrate personal awareness and knowledge of health and safety legislative requirements in order to work safely and prevent injury or harm to self and others. It covers identifying and orally reporting common construction hazards, understanding basic risk control measures, and identifying procedures for responding to potential incidents and emergencies. It also covers correctly selecting and fitting common personal protective equipment (PPE) used for construction work. This unit meets the general construction induction training requirements of: Part 1.1 Definitions and Part 6.5 of the Model Work Health and Safety Regulations; Division 11 of Part 3 of the Occupational Safety and Health Regulations 1996 for Western Australia; and Division 3 of Part 5.1 of the Occupational Health and Safety Regulations 2007 for Victoria. It is expected that site-specific induction training will be conducted prior to conducting construction work. Licensing, legislative, regulatory or certification requirements apply to this unit. Relevant work health and safety state and territory regulatory authorities should be consulted to confirm jurisdictional requirements.
Students will attend on campus classes as well as engage in learning activities through ECU's LMS
| Joondalup | Mount Lawley | South West (Bunbury) | |
|---|---|---|---|
| Semester 1 | Not Offered | 10 x 2.5 hour lecture | Not Offered |
| Semester 2 | Not Offered | 5 x 2.5 hour lecture | Not Offered |
For more information see the Semester Timetable
A person demonstrating competency in this unit must satisfy the requirements of the elements, performance criteria, foundation skills, and range of conditions of this unit, in addition to the specific performance and knowledge evidence described below. The person must: identify and orally report two construction hazards orally explain how risk could be reduced or removed in relation to those two hazards select appropriate personal protective equipment (PPE) to control the risk orally explain basic procedures for responding to incidents and emergencies, including types and purpose of the following fire safety equipment: fire blankets fire extinguishers, including water, carbon dioxide, powder and foam hose reels and mains identify and orally explain the meaning of required safety signs and symbols orally explain the purpose of job safety analyses (JSAs), safe work method statements (SWMS) and safety data sheets (SDS) orally explain the roles of the following designated health and safety personnel: first aid officers work health and safety representatives work health and safety committee members supervisors. The person must also demonstrate correctly fitting to themselves the PPE listed below: eye protection hearing protection hard hat high visibility retro reflective vest.
The following must be present and available to learners during assessment activities: equipment: all of the PPE listed in the performance evidence specifications: state or territory Act relevant to the location of the learner, as specified in the range of conditions. The assessment of performance evidence must be done by direct observation of the learner by an assessor, either by an assessor observing the learner physically and/or by an assessor observing the learner via audio and visual media in real time. Assessor requirements As a minimum, assessors must satisfy the assessor requirements in the Standards for Registered Training Organisations (RTOs) current at the time of assessment. Assessors must hold the unit CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry, or its successor.
GS5 VET GRADING SCHEMA Used for WAAPA VET only
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Students please note: The marks and grades received by students on assessments may be subject to further moderation. Informal vivas may be conducted as part of an assessment task, where staff require further information to confirm the learning outcomes have been met. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work as well as any generative artificial intelligence tools that may have been used. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.
Breaches of academic integrity can include:
Copying the words, ideas or creative works of other people or generative artificial intelligence tools, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).
Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).
Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.
Using or having access to unauthorised materials in an exam or test.
Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.
ECU's policies and more information about academic integrity can be found on the student academic integrity website.
All commencing ECU students are required to complete the Academic Integrity Module.
In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.
Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.
CPCCWHS1001|1|2