Visit ECU Homepage
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
Your unit may be subject to government or third party COVID-19 vaccination requirements. Please consider this before enrolling in this unit, and speak with the unit coordinator if this raises any concerns.
This unit describes the skills and knowledge required to use different computer-aided design and drafting (CADD) program functions to produce drawings and documentation. It involves preparing to undertake the work, understanding the object or project brief parameters and measurements and finalising drawings according to requirements. The focus of this unit is on the technical skills required to operate CADD, not on design skills. The unit applies to those who use computer-aided drawing skills in various contexts. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Students will attend on campus classes as well as engage in learning activities through ECU's LMS
| Joondalup | Mount Lawley | South West (Bunbury) | |
|---|---|---|---|
| Vet Full | Not Offered | 18 x 3 hour seminar | Not Offered |
For more information see the Semester Timetable
The candidate must demonstrate the ability to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including evidence of the ability to: use features and functions of a computer-aided design and drafting (CADD) program to produce at least three different computer-aided drawings that meet project objectives. In the course of the above, the candidate must: select CADD hardware and software to suit project requirements follow operating instructions and organisational procedures use feedback from others to refine and produce final drawings within specified timelines.
The candidate must be able to demonstrate knowledge to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including knowledge of: software, peripheral equipment and tools used for CADD ways in which CADD is used within the specific workplace situation typical features and functions of CADD programs, including: o drawing tools to support methods for drawing lines, arcs, polylines, texts, dimensions o view displays o edit functions o working with layers o plotting and printing.
Skills in this unit must be demonstrated in a workplace or simulated environment where the conditions are typical of those in a working environment in this industry. This includes access to: CADD equipment and software project or concept information operating instructions and organisational procedures required personnel. Assessors of this unit must satisfy the requirements for assessors in applicable vocational educational and training legislation, frameworks and/or standards.
GS5 VET GRADING SCHEMA Used for WAAPA VET only
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.
Breaches of academic integrity can include:
Copying the words, ideas or creative works of other people, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).
Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).
Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.
Using or having access to unauthorised materials in an exam or test.
Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.
ECU's policies and more information about academic integrity can be found on the student academic integrity website.
All commencing ECU students are required to complete the Academic Integrity Module.
In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.
Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.
CUAACD312|1|1
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
Your unit may be subject to government or third party COVID-19 vaccination requirements. Please consider this before enrolling in this unit, and speak with the unit coordinator if this raises any concerns.
This unit describes the skills and knowledge required to use different computer-aided design and drafting (CADD) program functions to produce drawings and documentation. It involves preparing to undertake the work, understanding the object or project brief parameters and measurements and finalising drawings according to requirements. The focus of this unit is on the technical skills required to operate CADD, not on design skills. The unit applies to those who use computer-aided drawing skills in various contexts. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Students will attend on campus classes as well as engage in learning activities through ECU's LMS
| Joondalup | Mount Lawley | South West (Bunbury) | |
|---|---|---|---|
| Vet Full | Not Offered | 18 x 3 hour seminar | Not Offered |
For more information see the Semester Timetable
The candidate must demonstrate the ability to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including evidence of the ability to: use features and functions of a computer-aided design and drafting (CADD) program to produce at least three different computer-aided drawings that meet project objectives. In the course of the above, the candidate must: select CADD hardware and software to suit project requirements follow operating instructions and organisational procedures use feedback from others to refine and produce final drawings within specified timelines.
The candidate must be able to demonstrate knowledge to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including knowledge of: software, peripheral equipment and tools used for CADD ways in which CADD is used within the specific workplace situation typical features and functions of CADD programs, including: o drawing tools to support methods for drawing lines, arcs, polylines, texts, dimensions o view displays o edit functions o working with layers o plotting and printing.
Skills in this unit must be demonstrated in a workplace or simulated environment where the conditions are typical of those in a working environment in this industry. This includes access to: CADD equipment and software project or concept information operating instructions and organisational procedures required personnel. Assessors of this unit must satisfy the requirements for assessors in applicable vocational educational and training legislation, frameworks and/or standards.
GS5 VET GRADING SCHEMA Used for WAAPA VET only
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.
Breaches of academic integrity can include:
Copying the words, ideas or creative works of other people, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).
Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).
Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.
Using or having access to unauthorised materials in an exam or test.
Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.
ECU's policies and more information about academic integrity can be found on the student academic integrity website.
All commencing ECU students are required to complete the Academic Integrity Module.
In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.
Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.
CUAACD312|1|2