Visit ECU Homepage
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
Please note that there may be some modifications to the assessment schedule promoted in Handbook for Semester 1 2023 Units. All assessment changes will be published by 20th February 2023. All students are reminded to check the handbook at the beginning of semester to ensure they have the correct outline.
This unit describes the skills and knowledge required to make three-dimensional (3-D) physical scale models in response to specifications. It does not cover the use of 3-D digital software. It involves preparing to make scale models, completing construction of the models and finalising the model construction process according to scale model requirements. The unit applies to those who work in many industries and use any 3-D form to make scale models as an essential part of the design process for a range productions or events. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Students will attend on campus classes as well as engage in learning activities through ECU's LMS
| Joondalup | Mount Lawley | South West (Bunbury) | |
|---|---|---|---|
| Vet Full | Not Offered | 17 x 2 hour seminar | Not Offered |
For more information see the Semester Timetable
The candidate must demonstrate the ability to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including evidence of the ability to: make scale models according to at least two different project requirements. In the course of the above, the candidate must: identify appropriate equipment and materials to make three-dimensional (3-D) models establish a safe work space for the use of equipment and materials use selected techniques and processes to make models that meet project requirements use safe work practices at all times communicate with others during preparation, construction and presentation of 3-D models.
The candidate must be able to demonstrate knowledge to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including knowledge of: common model making methods, processes and techniques, including the physical properties and capabilities of equipment, tools and materials used ways to present finished scale models work space requirements for producing scale models, including set-up of work space for particular types of work issues and challenges that arise in making scale models intellectual property requirements and legislation associated with making scale models work health and safety requirements that apply to scale model making.
Skills in this unit must be demonstrated in a workplace or simulated environment where the conditions are typical of those in a working environment in this industry. This includes access to: documented scale model requirements and organisational procedures tools, materials and equipment required to construct scale models interaction with appropriate people. Assessors of this unit must satisfy the requirements for assessors in applicable vocational educational and training legislation, frameworks and/or standards.
GS5 VET GRADING SCHEMA Used for WAAPA VET only
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Students please note: The marks and grades received by students on assessments may be subject to further moderation. Informal vivas may be conducted as part of an assessment task, where staff require further information to confirm the learning outcomes have been met. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work as well as any generative artificial intelligence tools that may have been used. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.
Breaches of academic integrity can include:
Copying the words, ideas or creative works of other people or generative artificial intelligence tools, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).
Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).
Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.
Using or having access to unauthorised materials in an exam or test.
Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.
ECU's policies and more information about academic integrity can be found on the student academic integrity website.
All commencing ECU students are required to complete the Academic Integrity Module.
In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.
Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.
CUAACD314|1|1
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
This unit describes the skills and knowledge required to make three-dimensional (3-D) physical scale models in response to specifications. It does not cover the use of 3-D digital software. It involves preparing to make scale models, completing construction of the models and finalising the model construction process according to scale model requirements. The unit applies to those who work in many industries and use any 3-D form to make scale models as an essential part of the design process for a range productions or events. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Students will attend on campus classes as well as engage in learning activities through ECU's LMS
| Joondalup | Mount Lawley | South West (Bunbury) | |
|---|---|---|---|
| Vet Full | Not Offered | 17 x 2 hour seminar | Not Offered |
For more information see the Semester Timetable
The candidate must demonstrate the ability to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including evidence of the ability to: make scale models according to at least two different project requirements. In the course of the above, the candidate must: identify appropriate equipment and materials to make three-dimensional (3-D) models establish a safe work space for the use of equipment and materials use selected techniques and processes to make models that meet project requirements use safe work practices at all times communicate with others during preparation, construction and presentation of 3-D models.
The candidate must be able to demonstrate knowledge to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including knowledge of: common model making methods, processes and techniques, including the physical properties and capabilities of equipment, tools and materials used ways to present finished scale models work space requirements for producing scale models, including set-up of work space for particular types of work issues and challenges that arise in making scale models intellectual property requirements and legislation associated with making scale models work health and safety requirements that apply to scale model making.
Skills in this unit must be demonstrated in a workplace or simulated environment where the conditions are typical of those in a working environment in this industry. This includes access to: documented scale model requirements and organisational procedures tools, materials and equipment required to construct scale models interaction with appropriate people. Assessors of this unit must satisfy the requirements for assessors in applicable vocational educational and training legislation, frameworks and/or standards.
GS5 VET GRADING SCHEMA Used for WAAPA VET only
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Students please note: The marks and grades received by students on assessments may be subject to further moderation. Informal vivas may be conducted as part of an assessment task, where staff require further information to confirm the learning outcomes have been met. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work as well as any generative artificial intelligence tools that may have been used. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.
Breaches of academic integrity can include:
Copying the words, ideas or creative works of other people or generative artificial intelligence tools, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).
Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).
Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.
Using or having access to unauthorised materials in an exam or test.
Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.
ECU's policies and more information about academic integrity can be found on the student academic integrity website.
All commencing ECU students are required to complete the Academic Integrity Module.
In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.
Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.
CUAACD314|1|2