Visit ECU Homepage
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
This unit describes the skills and knowledge required to install and disassemble audio equipment for a range of live performance and entertainment productions. It applies to individuals who work collaboratively as part of a production team to install, align, test and disassemble audio equipment for playback, mixing and recording purposes. The model Work Health and Safety (WHS) Regulations list the work that requires a high risk work licence, including dogging and rigging. Completion of the following units is required for certification at basic, intermediate and advanced levels: CPCCLDG3001A Licence to perform dogging; CPCCLRG3001A Licence to perform rigging basic level; CPCCLRG3002A Licence to perform rigging intermediate level; CPCCLRG4001A Licence to perform rigging advanced level. Sets and staging for some productions may fall within the definition of construction work. Under section 274 of the WHS Act, it is a requirement of the approved Code of Practice for Construction Work that any person entering a construction site must successfully complete general construction induction training through a Registered Training Organisation. Completion of the unit CPCCOHS1001A Work safely in the construction industry fulfills this requirement.
This unit forms part of the Certificate IV in Live Production and Technical Services. This course will be delivered at WAAPA with a component of work experience in each of the partner secondary schools under the umbrella of CareerLink. The course will be delivered face to face one day a week for 3 school terms, with the opportunity to extend to Saturdays and school holidays where required. The face to face delivery will be mainly on the Mount Lawley campus.
GS5 VET GRADING SCHEMA Used for WAAPA VET only
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Students please note: The marks and grades received by students on assessments may be subject to further moderation. Informal vivas may be conducted as part of an assessment task, where staff require further information to confirm the learning outcomes have been met. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work as well as any generative artificial intelligence tools that may have been used. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.
Breaches of academic integrity can include:
Copying the words, ideas or creative works of other people or generative artificial intelligence tools, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).
Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).
Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.
Using or having access to unauthorised materials in an exam or test.
Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.
ECU's policies and more information about academic integrity can be found on the student academic integrity website.
All commencing ECU students are required to complete the Academic Integrity Module.
In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.
Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.
CUASOU308|1|1
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
This unit describes the skills and knowledge required to install and disassemble audio equipment for a range of live performance and entertainment productions. It applies to individuals who work collaboratively as part of a production team to install, align, test and disassemble audio equipment for playback, mixing and recording purposes. The model Work Health and Safety (WHS) Regulations list the work that requires a high risk work licence, including dogging and rigging. Completion of the following units is required for certification at basic, intermediate and advanced levels: CPCCLDG3001A Licence to perform dogging; CPCCLRG3001A Licence to perform rigging basic level; CPCCLRG3002A Licence to perform rigging intermediate level; CPCCLRG4001A Licence to perform rigging advanced level. Sets and staging for some productions may fall within the definition of construction work. Under section 274 of the WHS Act, it is a requirement of the approved Code of Practice for Construction Work that any person entering a construction site must successfully complete general construction induction training through a Registered Training Organisation. Completion of the unit CPCCOHS1001A Work safely in the construction industry fulfills this requirement.
This unit forms part of the Certificate IV in Live Production and Technical Services. This course will be delivered at WAAPA with a component of work experience in each of the partner secondary schools under the umbrella of CareerLink. The course will be delivered face to face one day a week for 3 school terms, with the opportunity to extend to Saturdays and school holidays where required. The face to face delivery will be mainly on the Mount Lawley campus.
GS5 VET GRADING SCHEMA Used for WAAPA VET only
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Students please note: The marks and grades received by students on assessments may be subject to further moderation. Informal vivas may be conducted as part of an assessment task, where staff require further information to confirm the learning outcomes have been met. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work as well as any generative artificial intelligence tools that may have been used. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.
Breaches of academic integrity can include:
Copying the words, ideas or creative works of other people or generative artificial intelligence tools, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).
Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).
Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.
Using or having access to unauthorised materials in an exam or test.
Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.
ECU's policies and more information about academic integrity can be found on the student academic integrity website.
All commencing ECU students are required to complete the Academic Integrity Module.
In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.
Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.
CUASOU308|1|2