Visit ECU Homepage
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
Please note that there may be some modifications to the assessment schedule promoted in Handbook for Semester 1 2023 Units. All assessment changes will be published by 20th February 2023. All students are reminded to check the handbook at the beginning of semester to ensure they have the correct outline.
This unit describes the skills and knowledge required to create a final sound balance for a production. It applies to individuals who work creatively and collaboratively with sound engineers, sound mixers, sound editors and studio technicians to create a final sound balance for a range of recorded and live productions. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Supersedes and is equivalent to CUSSOU504A - Create a final sound balance
Students will attend on campus classes as well as engage in learning activities through ECU's LMS
| Joondalup | Mount Lawley | South West (Bunbury) | |
|---|---|---|---|
| Vet Full | Not Offered | 18 x 3 hour seminar | Not Offered |
For more information see the Semester Timetable
Evidence of the ability to: - create final sound balances that meet creative, artistic and production requirements - make adjustments so that sound balance and characteristics are within technical limits - work creatively and collaboratively with others on the creation of sound balances - use a range of industry current sound recording, production and playback equipment in line with production requirements and safety standards. Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.
To complete the unit requirements safely and effectively, the individual must: - describe the production requirements that may impact ideas and decisions about options for creating sound balance - describe the principles and techniques used to achieve a simultaneous balance - explain the operational principles for available sound recording, production and playback equipment - describe the main techniques for evaluating the process used to create a final sound balance - explain the issues and challenges that typically arise when creating a final sound balance, and how to address them.
Assessment must be conducted in a safe environment where evidence gathered demonstrates consistent performance of typical activities experienced in creative arts industry environments. The assessment environment must include access to: - sound recording, production and playback equipment - productions that require a final sound balance - production documentation - interaction with others. Assessors of this unit must satisfy the requirements for assessors in applicable vocational educational and training legislation, frameworks and/or standards.
GS5 VET GRADING SCHEMA Used for WAAPA VET only
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Students please note: The marks and grades received by students on assessments may be subject to further moderation. Informal vivas may be conducted as part of an assessment task, where staff require further information to confirm the learning outcomes have been met. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work as well as any generative artificial intelligence tools that may have been used. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.
Breaches of academic integrity can include:
Copying the words, ideas or creative works of other people or generative artificial intelligence tools, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).
Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).
Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.
Using or having access to unauthorised materials in an exam or test.
Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.
ECU's policies and more information about academic integrity can be found on the student academic integrity website.
All commencing ECU students are required to complete the Academic Integrity Module.
In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.
Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.
CUASOU506|1|1
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
This unit describes the skills and knowledge required to create a final sound balance for a production. It applies to individuals who work creatively and collaboratively with sound engineers, sound mixers, sound editors and studio technicians to create a final sound balance for a range of recorded and live productions. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Supersedes and is equivalent to CUSSOU504A - Create a final sound balance
Students will attend on campus classes as well as engage in learning activities through ECU's LMS
| Joondalup | Mount Lawley | South West (Bunbury) | |
|---|---|---|---|
| Vet Full | Not Offered | 18 x 3 hour seminar | Not Offered |
For more information see the Semester Timetable
Evidence of the ability to: - create final sound balances that meet creative, artistic and production requirements - make adjustments so that sound balance and characteristics are within technical limits - work creatively and collaboratively with others on the creation of sound balances - use a range of industry current sound recording, production and playback equipment in line with production requirements and safety standards. Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.
To complete the unit requirements safely and effectively, the individual must: - describe the production requirements that may impact ideas and decisions about options for creating sound balance - describe the principles and techniques used to achieve a simultaneous balance - explain the operational principles for available sound recording, production and playback equipment - describe the main techniques for evaluating the process used to create a final sound balance - explain the issues and challenges that typically arise when creating a final sound balance, and how to address them.
Assessment must be conducted in a safe environment where evidence gathered demonstrates consistent performance of typical activities experienced in creative arts industry environments. The assessment environment must include access to: - sound recording, production and playback equipment - productions that require a final sound balance - production documentation - interaction with others. Assessors of this unit must satisfy the requirements for assessors in applicable vocational educational and training legislation, frameworks and/or standards.
GS5 VET GRADING SCHEMA Used for WAAPA VET only
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Students please note: The marks and grades received by students on assessments may be subject to further moderation. Informal vivas may be conducted as part of an assessment task, where staff require further information to confirm the learning outcomes have been met. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work as well as any generative artificial intelligence tools that may have been used. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.
Breaches of academic integrity can include:
Copying the words, ideas or creative works of other people or generative artificial intelligence tools, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).
Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).
Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.
Using or having access to unauthorised materials in an exam or test.
Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.
ECU's policies and more information about academic integrity can be found on the student academic integrity website.
All commencing ECU students are required to complete the Academic Integrity Module.
In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.
Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.
CUASOU506|1|2