1. Home
  2. Microprocessor Systems [ENS2257]

Faculty of Health, Engineering and Science

School: Engineering

This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.

  • Unit Title

    Microprocessor Systems

  • Unit Code

    ENS2257

  • Year

    2015

  • Enrolment Period

    1

  • Version

    3

  • Credit Points

    15

  • Full Year Unit

     N

  • Mode of Delivery

    On Campus

Description

This unit provides an introduction to microprocessor and microcontroller systems. The basic architecture of a generic microprocessor is examined and concepts of assembly language programming, memory devices, data bus operation and input/output interfacing are explored.

Prerequisite Rule

(Students must pass 1 units from CSP1150, CSP2151 AND Students must pass 1 units from ENS1161, ENS1162)

Learning Outcomes

On completion of this unit students should be able to:

  1. Describe the fundamental architecture of a microprocessor system.
  2. Design simple microcontroller based systems.
  3. Explain how memory and I/O devices are interfaced to a microprocessor.
  4. Explain the operation of interrupt, timer and serial communication sub-systems in microprocessors.
  5. Write simple programs to control microprocessor based systems and interfaced hardware.

Unit Content

  1. CPU architecture; registers, instructions and data addressing modes.
  2. Counters and timers.
  3. Fundamentals of assembly language programming, data structures, and subroutine calls.
  4. I/O, polling and interrupts.
  5. Interfacing of microprocessors with external hardware (LEDs, switches, displays, sensors, etc.).
  6. Memory devices and interfacing.
  7. Overview of microprocessor and microcontroller systems.
  8. Parallel and serial communication methods.
  9. Sources of interrupts, interrupt cycle, interrupt handling routines.

Additional Learning Experience Information

Lectures, tutorials and laboratories.

Assessment

GS1 GRADING SCHEMA 1 Used for standard coursework units

Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant Board of Examiners.

ON CAMPUS
TypeDescriptionValue
AssignmentTheory based assignment10%
ProjectMicroprocessor system project and laboratory work30%
Examination ^End of semester examination60%

^ Mandatory to Pass

Text References

  • ^ Hamacher, C., Vranesic, Z., Zaky, S., & Manjikian, N. (2012). Computer organization and embedded systems (6th ed.). New York: McGraw-Hill.
  • Tocci, R.J., & Ambrosio, F.J. (2003). Microprocessors and microcomputers: hardware and software (6th ed.). New Jersey: Prentice Hall.
  • Pack, D.J., & Barrett, S.F. (2007). 68HC12 microcontroller - theory and applications (2nd ed.). New Jersey: Prentice Hall.
  • Spasov, P. (2004). Microcontroller technology: the 68HC11 (5th ed.). New Jersey: Prentice Hall.
  • Gaonkar, R.S. (2002). Microprocessor architecture, programming and applications with the 8085 (5th ed.). New Jersey: Prentice Hall.
  • Mazidi, M. A., Mazidi, J., & Causey, D. (2010). The x86 PC: assembly language, design, and interfacing (5th ed.). New Jersey: Prentice Hall.

^ Mandatory reference

Disability Standards for Education (Commonwealth 2005)

For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.

Academic Misconduct

Edith Cowan University has firm rules governing academic misconduct and there are substantial penalties that can be applied to students who are found in breach of these rules. Academic misconduct includes, but is not limited to:

  • plagiarism;
  • unauthorised collaboration;
  • cheating in examinations;
  • theft of other students' work;

Additionally, any material submitted for assessment purposes must be work that has not been submitted previously, by any person, for any other unit at ECU or elsewhere.

The ECU rules and policies governing all academic activities, including misconduct, can be accessed through the ECU website.

ENS2257|3|1

Faculty of Health, Engineering and Science

School: Engineering

This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.

  • Unit Title

    Microprocessor Systems

  • Unit Code

    ENS2257

  • Year

    2015

  • Enrolment Period

    2

  • Version

    3

  • Credit Points

    15

  • Full Year Unit

     N

  • Mode of Delivery

    On Campus

Description

This unit provides an introduction to microprocessor and microcontroller systems. The basic architecture of a generic microprocessor is examined and concepts of assembly language programming, memory devices, data bus operation and input/output interfacing are explored.

Prerequisite Rule

(Students must pass 1 units from CSP1150, CSP2151 AND Students must pass 1 units from ENS1161, ENS1162)

Learning Outcomes

On completion of this unit students should be able to:

  1. Describe the fundamental architecture of a microprocessor system.
  2. Design simple microcontroller based systems.
  3. Explain how memory and I/O devices are interfaced to a microprocessor.
  4. Explain the operation of interrupt, timer and serial communication sub-systems in microprocessors.
  5. Write simple programs to control microprocessor based systems and interfaced hardware.

Unit Content

  1. CPU architecture; registers, instructions and data addressing modes.
  2. Counters and timers.
  3. Fundamentals of assembly language programming, data structures, and subroutine calls.
  4. I/O, polling and interrupts.
  5. Interfacing of microprocessors with external hardware (LEDs, switches, displays, sensors, etc.).
  6. Memory devices and interfacing.
  7. Overview of microprocessor and microcontroller systems.
  8. Parallel and serial communication methods.
  9. Sources of interrupts, interrupt cycle, interrupt handling routines.

Additional Learning Experience Information

Lectures, tutorials and laboratories.

Assessment

GS1 GRADING SCHEMA 1 Used for standard coursework units

Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant Board of Examiners.

ON CAMPUS
TypeDescriptionValue
AssignmentTheory based assignment10%
ProjectMicroprocessor system project and laboratory work30%
Examination ^End of semester examination60%

^ Mandatory to Pass

Text References

  • ^ Hamacher, C., Vranesic, Z., Zaky, S., & Manjikian, N. (2012). Computer organization and embedded systems (6th ed.). New York: McGraw-Hill.
  • Tocci, R.J., & Ambrosio, F.J. (2003). Microprocessors and microcomputers: hardware and software (6th ed.). New Jersey: Prentice Hall.
  • Pack, D.J., & Barrett, S.F. (2007). 68HC12 microcontroller - theory and applications (2nd ed.). New Jersey: Prentice Hall.
  • Spasov, P. (2004). Microcontroller technology: the 68HC11 (5th ed.). New Jersey: Prentice Hall.
  • Gaonkar, R.S. (2002). Microprocessor architecture, programming and applications with the 8085 (5th ed.). New Jersey: Prentice Hall.
  • Mazidi, M. A., Mazidi, J., & Causey, D. (2010). The x86 PC: assembly language, design, and interfacing (5th ed.). New Jersey: Prentice Hall.

^ Mandatory reference

Disability Standards for Education (Commonwealth 2005)

For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.

Academic Misconduct

Edith Cowan University has firm rules governing academic misconduct and there are substantial penalties that can be applied to students who are found in breach of these rules. Academic misconduct includes, but is not limited to:

  • plagiarism;
  • unauthorised collaboration;
  • cheating in examinations;
  • theft of other students' work;

Additionally, any material submitted for assessment purposes must be work that has not been submitted previously, by any person, for any other unit at ECU or elsewhere.

The ECU rules and policies governing all academic activities, including misconduct, can be accessed through the ECU website.

ENS2257|3|2