Visit ECU Homepage
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
Unit operations in chemical engineering deals with the change of substances (gases, liquids, solids) by means of physical, chemical and biological processes for industrial purposes. It takes the view that any chemical process, on whatever scale conducted, may be resolved into a coordinated series of operations such as pulverising, mixing, heating, roasting, absorbing, condensing, lixiviating, electrolysing and the like. The number of the most important and basic unit operations is not very large and they are governed by the fundamental laws of mathematics, physics, chemistry, and mechanics, which provide an approximate description of the real processes. In this unit, students will learn about the 'Unit Operations' concept, which shows that the process of abstraction can be carried out by analysing unit operations in terms of fundamental principles such as mass and energy balances, phase equilibria, and transport of momentum, energy and mass.
Students must pass 1 units from ENS2116
On completion of this unit students should be able to:
Lectures, tutorials and group based laboratory work.
GS1 GRADING SCHEMA 1 Used for standard coursework units
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant Board of Examiners.
| Type | Description | Value |
|---|---|---|
| Laboratory Work | Laboratory reports | 30% |
| Test | Mid-semester test | 20% |
| Examination | End of semester examination | 50% |
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Edith Cowan University has firm rules governing academic misconduct and there are substantial penalties that can be applied to students who are found in breach of these rules. Academic misconduct includes, but is not limited to:
Additionally, any material submitted for assessment purposes must be work that has not been submitted previously, by any person, for any other unit at ECU or elsewhere.
The ECU rules and policies governing all academic activities, including misconduct, can be accessed through the ECU website.
ENS3112|1|1
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
Unit operations in chemical engineering deals with the change of substances (gases, liquids, solids) by means of physical, chemical and biological processes for industrial purposes. It takes the view that any chemical process, on whatever scale conducted, may be resolved into a coordinated series of operations such as pulverising, mixing, heating, roasting, absorbing, condensing, lixiviating, electrolysing and the like. The number of the most important and basic unit operations is not very large and they are governed by the fundamental laws of mathematics, physics, chemistry, and mechanics, which provide an approximate description of the real processes. In this unit, students will learn about the 'Unit Operations' concept, which shows that the process of abstraction can be carried out by analysing unit operations in terms of fundamental principles such as mass and energy balances, phase equilibria, and transport of momentum, energy and mass.
Students must pass 1 units from ENS2116
On completion of this unit students should be able to:
Lectures, tutorials and group based laboratory work.
GS1 GRADING SCHEMA 1 Used for standard coursework units
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant Board of Examiners.
| Type | Description | Value |
|---|---|---|
| Laboratory Work | Laboratory reports | 30% |
| Test | Mid-semester test | 20% |
| Examination | End of semester examination | 50% |
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Edith Cowan University has firm rules governing academic misconduct and there are substantial penalties that can be applied to students who are found in breach of these rules. Academic misconduct includes, but is not limited to:
Additionally, any material submitted for assessment purposes must be work that has not been submitted previously, by any person, for any other unit at ECU or elsewhere.
The ECU rules and policies governing all academic activities, including misconduct, can be accessed through the ECU website.
ENS3112|1|2