Faculty of Health, Engineering and Science
School: Engineering
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
Unit Title
Engineering Geology and Rock MechanicsUnit Code
ENS3208Year
2015Enrolment Period
1Version
1Credit Points
15Full Year Unit
N
Mode of Delivery
On Campus
Description
This unit provides an introduction to the engineering geology and mechanics of rocks. It deals with engineering properties of rocks, their behaviour under applied loads, and their applications in civil and mining engineering projects.
Prerequisite Rule
Students must pass 2 units from ENS3242, MAT1236
Learning Outcomes
On completion of this unit students should be able to:
- Analyse and describe the properties of rocks that affect their ability to support themselves and any imposed loads.
- Demonstrate an understanding of the processes leading to the formation of rocks and their structures.
- Design rock slopes and rock foundations for varying site conditions.
- Present geological data.
- Specify appropriate rock stabilisation methods.
Unit Content
- Foundations on rock.
- Geological applications in engineering projects: earthquakes, hydrogeology, environmental geology, subsurface investigation, civil engineering projects, mining engineering projects.
- Geological formations and structures: structure of the earth, rock minerals, rock formation and types, dip and dip directions, folds, faults and discontinuities, weathering of rocks, soil formation and clay minerals.
- Rock mass classification: intact rock and rock mass, rock quality designation, rock mass classification systems, RMR system, Q-system.
- Rock properties and laboratory testing: engineering properties of rocks, uniaxial compressive strength test, indirect tensile strength test, point load strength test, slake durability test, Schmidt hammer test, triaxial test.
- Rock slope stability: factor of safety, types of rock slope failure, slope stability analysis, slope stabilisation methods.
- Spherical presentation of geological data: fundamentals of spherical projections, intersections of planes and lines, spherical projections, applications.
- Strength and deformation characteristics of rocks: creep in rocks/time-dependant behaviour of rocks, in situ stresses and strength, stress, strain and constitutive models, stresses and strains in rock around underground openings, theories of rock failure.
Additional Learning Experience Information
Lectures, tutorials and laboratories.
Assessment
GS1 GRADING SCHEMA 1 Used for standard coursework units
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant Board of Examiners.
ON CAMPUS| Type | Description | Value |
|---|
| Exercise | Quizzes and tutorial exercises | 20% |
| Laboratory Work ^ | Laboratory performance and reports | 20% |
| Examination ^ | End of semester examination | 60% |
^ Mandatory to Pass
Text References
- ^ Sivakugan, N., Shukla, S.K. & Das, B.M. (2013). Rock mechanics - an introduction. Boca Raton: CRC Press, Taylor and Francis.
- Wyllie, D.C. & Mah, C.W. (2004). Rock slope engineering: civil and mining (4th ed.). New York: Spon Press.
- Goodman, R.E. (1989). Introduction to rock mechanics (2nd ed.). New York: John Wiley.
- Bell, F.G. (2007). Engineering geology (2nd ed.). Amsterdam: Elsevier.
- Jaeger, J.C., Cook, N.G.W., & Zimmerman, R.W. (2007). Fundamentals of rock mechanics. Malden, USA: Blackwell.
^ Mandatory reference
Disability Standards for Education (Commonwealth 2005)
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Academic Misconduct
Edith Cowan University has firm rules governing academic misconduct and there are substantial penalties that can be applied to students who are found in breach of these rules. Academic misconduct includes, but is not limited to:
- plagiarism;
- unauthorised collaboration;
- cheating in examinations;
- theft of other students' work;
Additionally, any material submitted for assessment purposes must be work that has not been submitted previously, by any person, for any other unit at ECU or elsewhere.
The ECU rules and policies governing all academic activities, including misconduct, can be accessed through the ECU website.
ENS3208|1|1
Faculty of Health, Engineering and Science
School: Engineering
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
Unit Title
Engineering Geology and Rock MechanicsUnit Code
ENS3208Year
2015Enrolment Period
2Version
1Credit Points
15Full Year Unit
N
Mode of Delivery
On Campus
Description
This unit provides an introduction to the engineering geology and mechanics of rocks. It deals with engineering properties of rocks, their behaviour under applied loads, and their applications in civil and mining engineering projects.
Prerequisite Rule
Students must pass 2 units from ENS3242, MAT1236
Learning Outcomes
On completion of this unit students should be able to:
- Analyse and describe the properties of rocks that affect their ability to support themselves and any imposed loads.
- Demonstrate an understanding of the processes leading to the formation of rocks and their structures.
- Design rock slopes and rock foundations for varying site conditions.
- Present geological data.
- Specify appropriate rock stabilisation methods.
Unit Content
- Foundations on rock.
- Geological applications in engineering projects: earthquakes, hydrogeology, environmental geology, subsurface investigation, civil engineering projects, mining engineering projects.
- Geological formations and structures: structure of the earth, rock minerals, rock formation and types, dip and dip directions, folds, faults and discontinuities, weathering of rocks, soil formation and clay minerals.
- Rock mass classification: intact rock and rock mass, rock quality designation, rock mass classification systems, RMR system, Q-system.
- Rock properties and laboratory testing: engineering properties of rocks, uniaxial compressive strength test, indirect tensile strength test, point load strength test, slake durability test, Schmidt hammer test, triaxial test.
- Rock slope stability: factor of safety, types of rock slope failure, slope stability analysis, slope stabilisation methods.
- Spherical presentation of geological data: fundamentals of spherical projections, intersections of planes and lines, spherical projections, applications.
- Strength and deformation characteristics of rocks: creep in rocks/time-dependant behaviour of rocks, in situ stresses and strength, stress, strain and constitutive models, stresses and strains in rock around underground openings, theories of rock failure.
Additional Learning Experience Information
Lectures, tutorials and laboratories.
Assessment
GS1 GRADING SCHEMA 1 Used for standard coursework units
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant Board of Examiners.
ON CAMPUS| Type | Description | Value |
|---|
| Exercise | Quizzes and tutorial exercises | 20% |
| Laboratory Work ^ | Laboratory performance and reports | 20% |
| Examination ^ | End of semester examination | 60% |
^ Mandatory to Pass
Text References
- ^ Sivakugan, N., Shukla, S.K. & Das, B.M. (2013). Rock mechanics - an introduction. Boca Raton: CRC Press, Taylor and Francis.
- Jaeger, J.C., Cook, N.G.W., & Zimmerman, R.W. (2007). Fundamentals of rock mechanics. Malden, USA: Blackwell.
- Wyllie, D.C. & Mah, C.W. (2004). Rock slope engineering: civil and mining (4th ed.). New York: Spon Press.
- Bell, F.G. (2007). Engineering geology (2nd ed.). Amsterdam: Elsevier.
- Goodman, R.E. (1989). Introduction to rock mechanics (2nd ed.). New York: John Wiley.
^ Mandatory reference
Disability Standards for Education (Commonwealth 2005)
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Academic Misconduct
Edith Cowan University has firm rules governing academic misconduct and there are substantial penalties that can be applied to students who are found in breach of these rules. Academic misconduct includes, but is not limited to:
- plagiarism;
- unauthorised collaboration;
- cheating in examinations;
- theft of other students' work;
Additionally, any material submitted for assessment purposes must be work that has not been submitted previously, by any person, for any other unit at ECU or elsewhere.
The ECU rules and policies governing all academic activities, including misconduct, can be accessed through the ECU website.
ENS3208|1|2
