Visit ECU Homepage
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
This unit teaches the fundamentals of analog and digital communication systems. It provides an in-depth coverage of continuous wave modulation systems, with particular emphasis on the influence of noise on the performance of these systems. An introduction to digital modulation is also provided towards the end. For each modulation technique, the methods for generation and recovery of the signals arediscussed and performance comparisons are made between different implementations.
Students must pass 1 unit from ENS3341, ENS3553
Unit was previously coded ENS3441
On completion of this unit students should be able to:
Students will attend on campus classes as well as engage in learning activities through ECUs LMS
| Joondalup | Mount Lawley | South West (Bunbury) | |
|---|---|---|---|
| Semester 1 | 13 x 2 hour lab | Not Offered | Not Offered |
| Semester 1 | 7 x 2 hour lecture | Not Offered | Not Offered |
| Semester 1 | 7 x 2 hour tutorial | Not Offered | Not Offered |
For more information see the Semester Timetable
Students will engage in learning experiences through ECUs LMS as well as additional ECU l
Lectures, tutorials and laboratory activities.
GS1 GRADING SCHEMA 1 Used for standard coursework units
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
| Type | Description | Value |
|---|---|---|
| Test | In-semester tests | 25% |
| Laboratory Work | Laboratory work and reports | 25% |
| Examination ^ | End of semester examination | 50% |
| Type | Description | Value |
|---|---|---|
| Assignment | Open book take home test with viva component | 25% |
| Exercise | Virtual laboratory activity | 25% |
| Assignment ^ | Summative assessment of unit content | 50% |
^ Mandatory to Pass
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Edith Cowan University has firm rules governing academic misconduct and there are substantial penalties that can be applied to students who are found in breach of these rules. Academic misconduct includes, but is not limited to:
Additionally, any material submitted for assessment purposes must be work that has not been submitted previously, by any person, for any other unit at ECU or elsewhere.
The ECU rules and policies governing all academic activities, including misconduct, can be accessed through the ECU website.
ENS3555|3|1
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
This unit teaches the fundamentals of analog and digital communication systems. It provides an in-depth coverage of continuous wave modulation systems, with particular emphasis on the influence of noise on the performance of these systems. An introduction to digital modulation is also provided towards the end. For each modulation technique, the methods for generation and recovery of the signals arediscussed and performance comparisons are made between different implementations.
Students must pass 1 unit from ENS3341, ENS3553
Unit was previously coded ENS3441
On completion of this unit students should be able to:
Students will attend on campus classes as well as engage in learning activities through ECUs LMS
| Joondalup | Mount Lawley | South West (Bunbury) | |
|---|---|---|---|
| Semester 1 | 13 x 2 hour lab | Not Offered | Not Offered |
| Semester 1 | 7 x 2 hour lecture | Not Offered | Not Offered |
| Semester 1 | 7 x 2 hour tutorial | Not Offered | Not Offered |
For more information see the Semester Timetable
Students will engage in learning experiences through ECUs LMS as well as additional ECU l
GS1 GRADING SCHEMA 1 Used for standard coursework units
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
| Type | Description | Value |
|---|---|---|
| Test | In-semester tests | 25% |
| Laboratory Work | Laboratory work and reports | 25% |
| Examination ^ | End of semester examination | 50% |
| Type | Description | Value |
|---|---|---|
| Assignment | Open book take home test with viva component | 25% |
| Exercise | Virtual laboratory activity | 25% |
| Assignment ^ | Summative assessment of unit content | 50% |
^ Mandatory to Pass
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Edith Cowan University has firm rules governing academic misconduct and there are substantial penalties that can be applied to students who are found in breach of these rules. Academic misconduct includes, but is not limited to:
Additionally, any material submitted for assessment purposes must be work that has not been submitted previously, by any person, for any other unit at ECU or elsewhere.
The ECU rules and policies governing all academic activities, including misconduct, can be accessed through the ECU website.
ENS3555|3|2