School: Engineering

This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.

  • Unit Title

    Power Electronics
  • Unit Code

    ENS4360
  • Year

    2017
  • Enrolment Period

    1
  • Version

    1
  • Credit Points

    15
  • Full Year Unit

    N
  • Mode of Delivery

    On Campus
  • Unit Coordinator

    Dr Stefan W LACHOWICZ

Description

This unit explores energy conversion, switching converter concepts, dc-dc converters, rectifiers, inverters, PWM (Pulse Width Modulation) and modulation strategies, ac-ac converters. General issues in power electronics such as discontinuous mode of operation, real sources and loads, power semiconductors and interfacing, magnetics fundamentals and control issues are also investigated.

Prerequisite Rule

Students must pass 1 units from ENS1253

Equivalent Rule

Unit was previously coded ENS4205

Learning Outcomes

On completion of this unit students should be able to:

  1. Analyse the operation and describe the theory of power switching devices and their application in power converters.
  2. Apply relevant knowledge of power electronics to sustainable design and development practice.
  3. Demonstrate knowledge of the theory and operation of dc-dc, and single- and poly-phase ac-dc, dc-ac and ac-ac converters.
  4. Undertake problem identification, formulation and solution in the design of power electronic systems.

Unit Content

  1. Concepts of magnetics for power electronics: transformer and inductor design.
  2. Converters in discontinuous modes.
  3. Dc-dc converters: buck, boost, flyback, buck-boost and boost-buck converters.
  4. Diode-capacitor circuits and rectifiers.
  5. Energy conversion, efficiency and reliability objectives.
  6. Inverters and Pulse Width Modulation and ac-ac conversion.
  7. Power semiconductors in converters: diodes, thyristors, power-FET, power bipolar transistors.
  8. Real sources and loads, resistors and capacitors.
  9. Switching converter concepts, switch matrix, Fourier analysis, regulation, distortion.

Additional Learning Experience Information

Lectures, tutorials and laboratory sessions.

Assessment

GS1 GRADING SCHEMA 1 Used for standard coursework units

Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant Board of Examiners.

ON CAMPUS
TypeDescriptionValue
Laboratory Work ^Laboratory work and reports25%
TestMid-semester test25%
Examination ^End of semester examination50%

^ Mandatory to Pass

Core Reading(s)

  • Krein, P. T. (2015). Elements of power electronics. (2nd ed.). New York, NY: Oxford University Press.

Disability Standards for Education (Commonwealth 2005)

For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.

Academic Misconduct

Edith Cowan University has firm rules governing academic misconduct and there are substantial penalties that can be applied to students who are found in breach of these rules. Academic misconduct includes, but is not limited to:

  • plagiarism;
  • unauthorised collaboration;
  • cheating in examinations;
  • theft of other students' work;

Additionally, any material submitted for assessment purposes must be work that has not been submitted previously, by any person, for any other unit at ECU or elsewhere.

The ECU rules and policies governing all academic activities, including misconduct, can be accessed through the ECU website.

ENS4360|1|1

School: Engineering

This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.

  • Unit Title

    Power Electronics
  • Unit Code

    ENS4360
  • Year

    2017
  • Enrolment Period

    2
  • Version

    1
  • Credit Points

    15
  • Full Year Unit

    N
  • Mode of Delivery

    On Campus
  • Unit Coordinator

    Dr Stefan W LACHOWICZ

Description

This unit explores energy conversion, switching converter concepts, dc-dc converters, rectifiers, inverters, PWM (Pulse Width Modulation) and modulation strategies, ac-ac converters. General issues in power electronics such as discontinuous mode of operation, real sources and loads, power semiconductors and interfacing, magnetics fundamentals and control issues are also investigated.

Prerequisite Rule

Students must pass 1 units from ENS1253

Equivalent Rule

Unit was previously coded ENS4205

Learning Outcomes

On completion of this unit students should be able to:

  1. Analyse the operation and describe the theory of power switching devices and their application in power converters.
  2. Apply relevant knowledge of power electronics to sustainable design and development practice.
  3. Demonstrate knowledge of the theory and operation of dc-dc, and single- and poly-phase ac-dc, dc-ac and ac-ac converters.
  4. Undertake problem identification, formulation and solution in the design of power electronic systems.

Unit Content

  1. Concepts of magnetics for power electronics: transformer and inductor design.
  2. Converters in discontinuous modes.
  3. Dc-dc converters: buck, boost, flyback, buck-boost and boost-buck converters.
  4. Diode-capacitor circuits and rectifiers.
  5. Energy conversion, efficiency and reliability objectives.
  6. Inverters and Pulse Width Modulation and ac-ac conversion.
  7. Power semiconductors in converters: diodes, thyristors, power-FET, power bipolar transistors.
  8. Real sources and loads, resistors and capacitors.
  9. Switching converter concepts, switch matrix, Fourier analysis, regulation, distortion.

Additional Learning Experience Information

Lectures, tutorials and laboratory sessions.

Assessment

GS1 GRADING SCHEMA 1 Used for standard coursework units

Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant Board of Examiners.

ON CAMPUS
TypeDescriptionValue
Laboratory Work ^Laboratory work and reports25%
TestMid-semester test25%
Examination ^End of semester examination50%

^ Mandatory to Pass


Disability Standards for Education (Commonwealth 2005)

For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.

Academic Misconduct

Edith Cowan University has firm rules governing academic misconduct and there are substantial penalties that can be applied to students who are found in breach of these rules. Academic misconduct includes, but is not limited to:

  • plagiarism;
  • unauthorised collaboration;
  • cheating in examinations;
  • theft of other students' work;

Additionally, any material submitted for assessment purposes must be work that has not been submitted previously, by any person, for any other unit at ECU or elsewhere.

The ECU rules and policies governing all academic activities, including misconduct, can be accessed through the ECU website.

ENS4360|1|2