Visit ECU Homepage
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
This unit builds on the general principles of mechanical design and applies these to detailed designs for product development. Building on the principles taught in the preceding unit, Mechanical Design and Development, more advanced mechanical design topics are covered relating to the detailed design of mechanical system elements. Students will work in teams to complete a major multidisciplinary detailed design project, which will require creative solutions to be effectively communicated.
Students must pass 1 units from ENS3105, ENS5105, ENS6132
Unit was previously coded ENS6104
On completion of this unit students should be able to:
Students will attend on campus classes as well as engage in learning activities through ECU Blackboard.
| Joondalup | Mount Lawley | South West (Bunbury) | |
|---|---|---|---|
| Semester 1 | 4 x 1 hour lab | Not Offered | Not Offered |
| Semester 1 | 13 x 2 hour lecture | Not Offered | Not Offered |
| Semester 1 | 13 x 1 hour tutorial | Not Offered | Not Offered |
For more information see the Semester Timetable
Seminars, laboratories and group projects.
GS1 GRADING SCHEMA 1 Used for standard coursework units
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant Board of Examiners.
| Type | Description | Value |
|---|---|---|
| Assignment | Theory based problem sets | 10% |
| Laboratory Work | Finite Element Analysis Laboratories | 10% |
| Project | Major group research, design and simulation project | 40% |
| Examination ^ | End of semester examination | 40% |
^ Mandatory to Pass
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Edith Cowan University has firm rules governing academic misconduct and there are substantial penalties that can be applied to students who are found in breach of these rules. Academic misconduct includes, but is not limited to:
Additionally, any material submitted for assessment purposes must be work that has not been submitted previously, by any person, for any other unit at ECU or elsewhere.
The ECU rules and policies governing all academic activities, including misconduct, can be accessed through the ECU website.
ENS5114|2|1
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
This unit builds on the general principles of mechanical design and applies these to detailed designs for product development. Building on the principles taught in the preceding unit, Mechanical Design and Development, more advanced mechanical design topics are covered relating to the detailed design of mechanical system elements. Students will work in teams to complete a major multidisciplinary detailed design project, which will require creative solutions to be effectively communicated.
Students must pass 1 units from ENS3105, ENS5105, ENS6132
Unit was previously coded ENS6104
On completion of this unit students should be able to:
Students will attend on campus classes as well as engage in learning activities through ECU Blackboard.
| Joondalup | Mount Lawley | South West (Bunbury) | |
|---|---|---|---|
| Semester 1 | 4 x 1 hour lab | Not Offered | Not Offered |
| Semester 1 | 13 x 2 hour lecture | Not Offered | Not Offered |
| Semester 1 | 13 x 1 hour tutorial | Not Offered | Not Offered |
For more information see the Semester Timetable
Seminars, laboratories and group projects.
GS1 GRADING SCHEMA 1 Used for standard coursework units
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant Board of Examiners.
| Type | Description | Value |
|---|---|---|
| Assignment | Theory based problem sets | 10% |
| Laboratory Work | Finite Element Analysis Laboratories | 10% |
| Project | Major group research, design and simulation project | 40% |
| Examination ^ | End of semester examination | 40% |
^ Mandatory to Pass
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Edith Cowan University has firm rules governing academic misconduct and there are substantial penalties that can be applied to students who are found in breach of these rules. Academic misconduct includes, but is not limited to:
Additionally, any material submitted for assessment purposes must be work that has not been submitted previously, by any person, for any other unit at ECU or elsewhere.
The ECU rules and policies governing all academic activities, including misconduct, can be accessed through the ECU website.
ENS5114|2|2