Visit ECU Homepage
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
Your unit may be subject to government or third party COVID-19 vaccination requirements. Please consider this before enrolling in this unit, and speak with the unit coordinator if this raises any concerns.
This unit builds on the general principles of mechanical design and applies these to detailed designs for product development. Building on the principles taught in the preceding unit, Mechanical Design and Development, more advanced mechanical design topics are covered relating to the detailed design of mechanical system elements. Students will work in teams to complete a major multidisciplinary detailed design project, which will require creative solutions to be effectively communicated.
Students must pass 1 units from ENS3105, ENS5105, ENS6132
Unit was previously coded ENS6104
On completion of this unit students should be able to:
GS1 GRADING SCHEMA 1 Used for standard coursework units
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
| Type | Description | Value |
|---|---|---|
| Assignment | Theory based problem sets | 10% |
| Laboratory Work | Finite Element Analysis Laboratories | 10% |
| Project | Major group research, design and simulation project | 40% |
| Examination ^ | End of semester examination | 40% |
| Type | Description | Value |
|---|---|---|
| Assignment | Theory based problem sets | 10% |
| Exercise | Virtual laboratory work | 10% |
| Project | Major group research, design and simulation project | 40% |
| Assignment ^ | Summative assessment of unit content | 40% |
^ Mandatory to Pass
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.
Breaches of academic integrity can include:
Copying the words, ideas or creative works of other people, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).
Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).
Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.
Using or having access to unauthorised materials in an exam or test.
Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.
ECU's policies and more information about academic integrity can be found on the student academic integrity website.
All commencing ECU students are required to complete the Academic Integrity Module.
In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.
Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.
ENS5114|2|1
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
Your unit may be subject to government or third party COVID-19 vaccination requirements. Please consider this before enrolling in this unit, and speak with the unit coordinator if this raises any concerns.
This unit builds on the general principles of mechanical design and applies these to detailed designs for product development. Building on the principles taught in the preceding unit, Mechanical Design and Development, more advanced mechanical design topics are covered relating to the detailed design of mechanical system elements. Students will work in teams to complete a major multidisciplinary detailed design project, which will require creative solutions to be effectively communicated.
Students must pass 1 unit from ENS3105, ENS5105, ENS6132
Unit was previously coded ENS6104
On completion of this unit students should be able to:
Students will attend on campus classes as well as engage in learning activities through ECU's LMS
| Joondalup | Mount Lawley | South West (Bunbury) | |
|---|---|---|---|
| Semester 2 | 13 x 1 hour lab | Not Offered | Not Offered |
| Semester 2 | 13 x 2 hour lecture | Not Offered | Not Offered |
| Semester 2 | 13 x 1 hour tutorial | Not Offered | Not Offered |
For more information see the Semester Timetable
Students will engage in learning experiences via ECU’s LMS as well as additional ECU learning technologies
GS1 GRADING SCHEMA 1 Used for standard coursework units
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
| Type | Description | Value |
|---|---|---|
| Assignment | Theory based problem sets | 10% |
| Laboratory Work | Finite Element Analysis Laboratories | 10% |
| Project | Major group research, design and simulation project | 40% |
| Examination ^ | End of semester examination | 40% |
| Type | Description | Value |
|---|---|---|
| Assignment | Theory based problem sets | 10% |
| Exercise | Virtual laboratory work | 10% |
| Project | Major group research, design and simulation project | 40% |
| Assignment ^ | Summative assessment of unit content | 40% |
^ Mandatory to Pass
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.
Breaches of academic integrity can include:
Copying the words, ideas or creative works of other people, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).
Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).
Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.
Using or having access to unauthorised materials in an exam or test.
Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.
ECU's policies and more information about academic integrity can be found on the student academic integrity website.
All commencing ECU students are required to complete the Academic Integrity Module.
In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.
Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.
ENS5114|3|2