Visit ECU Homepage
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
This unit extends the fundamentals introduced in ENS4240 Industrial Control with advanced concepts and techniques concerning the hierarchical levels of an industrial automation system: control, supervisory and execution. Students gain practical knowledge of advanced programming techniques for Programmable Logic Controllers (PLC) and Supervisory Control and Data Acquisition (SCADA) systems. Economically and practically relevant aspects of industrial control are addressed and modern industry specific solutions are introduced, concerning data communication, motor control, and safety systems. The unit concludes with the analysis, design and implementation of Manufacturing Execution Systems (MES).
Students must pass 1 units from ENS4240, ENS5240
On completion of this unit students should be able to:
Students will attend on campus classes as well as engage in learning activities through ECUs LMS
| Joondalup | Mount Lawley | South West (Bunbury) | |
|---|---|---|---|
| Semester 1 | 13 x 2.5 hour lab | Not Offered | Not Offered |
| Semester 1 | 13 x 2 hour lecture | Not Offered | Not Offered |
For more information see the Semester Timetable
Lectures, workshops and laboratory sessions.
GS1 GRADING SCHEMA 1 Used for standard coursework units
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
| Type | Description | Value |
|---|---|---|
| Laboratory Work ^ | Laboratory sessions and report | 50% |
| Project | Design Project | 50% |
^ Mandatory to Pass
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Edith Cowan University has firm rules governing academic misconduct and there are substantial penalties that can be applied to students who are found in breach of these rules. Academic misconduct includes, but is not limited to:
Additionally, any material submitted for assessment purposes must be work that has not been submitted previously, by any person, for any other unit at ECU or elsewhere.
The ECU rules and policies governing all academic activities, including misconduct, can be accessed through the ECU website.
ENS5130|2|1
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
This unit extends the fundamentals introduced in ENS4240 Industrial Control with advanced concepts and techniques concerning the hierarchical levels of an industrial automation system: control, supervisory and execution. Students gain practical knowledge of advanced programming techniques for Programmable Logic Controllers (PLC) and Supervisory Control and Data Acquisition (SCADA) systems. Economically and practically relevant aspects of industrial control are addressed and modern industry specific solutions are introduced, concerning data communication, motor control, and safety systems. The unit concludes with the analysis, design and implementation of Manufacturing Execution Systems (MES).
Students must pass 1 units from ENS4240, ENS5240
On completion of this unit students should be able to:
Students will attend on campus classes as well as engage in learning activities through ECUs LMS
| Joondalup | Mount Lawley | South West (Bunbury) | |
|---|---|---|---|
| Semester 1 | 13 x 2.5 hour lab | Not Offered | Not Offered |
| Semester 1 | 13 x 2 hour lecture | Not Offered | Not Offered |
For more information see the Semester Timetable
GS1 GRADING SCHEMA 1 Used for standard coursework units
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
| Type | Description | Value |
|---|---|---|
| Laboratory Work ^ | Laboratory sessions and report | 50% |
| Project | Design Project | 50% |
^ Mandatory to Pass
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Edith Cowan University has firm rules governing academic misconduct and there are substantial penalties that can be applied to students who are found in breach of these rules. Academic misconduct includes, but is not limited to:
Additionally, any material submitted for assessment purposes must be work that has not been submitted previously, by any person, for any other unit at ECU or elsewhere.
The ECU rules and policies governing all academic activities, including misconduct, can be accessed through the ECU website.
ENS5130|2|2