School: Engineering

This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.

  • Unit Title

    Sustainability and Renewable Energy
  • Unit Code

    ENS5445
  • Year

    2024
  • Enrolment Period

    1
  • Version

    4
  • Credit Points

    15
  • Full Year Unit

    N
  • Mode of Delivery

    On Campus
  • Unit Coordinator

    Dr Stefan LACHOWICZ

Description

This unit introduces students to the concepts behind and the design of renewable and efficient electric power systems. First, distributed power generation and its economics are discussed. This is followed by a detailed analysis of the design and operation of wind, photovoltaic, and other renewable power systems. Students will be exposed to the problem of meeting energy demand while implementing strategies to reduce greenhouse gas emissions.

Prerequisite Rule

Only Honours students must pass unit ENS1253. There are no pre-requisites required for students enrolled in the Master of Engineering (I59).

Learning Outcomes

On completion of this unit students should be able to:

  1. Analyse the economic and environmental benefits of utilising sustainable energy resources.
  2. Discuss how distributed electricity generation can be used to reduce greenhouse gas emissions while meeting demands for energy.
  3. Establish guidelines for the design and maintenance of wind and photovoltaic power systems.
  4. Inspect energy efficiency strategies applied to industrial, commercial and residential users of electricity.
  5. Investigate new developments in sustainability and renewable energy and reflect critically on their significance to engineering practice.

Unit Content

  1. Distributed generation technologies, fossil fuels, solar power, biomass for electricity, micro-hydropower, fuel cells.
  2. Economics of distributed resources, electric utility rate structure, energy economics, distributed benefits, integrated resource planning and demand-side management.
  3. Photovoltaic materials and electrical characteristics.
  4. Photovoltaic systems, grid connected systems, stand-alone systems, economics.
  5. Power quality aspects of distributed and renewable generation: voltage regulation problems, interference with the utility fault-clearing process, concerns for islanding, etc.
  6. Review of the electric power industry.
  7. The microgrid as an innovative small-scale distributed generation network and the required power control strategies.
  8. The smart grid paradigm for high penetrations of renewable energy and distributed generation.
  9. The solar resource characteristics.
  10. Wind power systems, types of wind turbines and their characteristics, wind turbine economics.

Learning Experience

Students will attend on campus classes as well as engage in learning activities through ECU's LMS

JoondalupMount LawleySouth West (Bunbury)
Semester 213 x 2 hour labNot OfferedNot Offered
Semester 213 x 2 hour lectureNot OfferedNot Offered
Semester 213 x 1 hour tutorialNot OfferedNot Offered

For more information see the Semester Timetable

Assessment

GS1 GRADING SCHEMA 1 Used for standard coursework units

Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.

Due to the professional competency skill development associated with this Unit, student attendance/participation within listed in-class activities and/or online activities including discussion boards is compulsory. Students failing to meet participation standards as outlined in the unit information may be awarded an I Grade (Fail - incomplete). Students who are unable to meet this requirement for medical or other reasons must seek the approval of the unit coordinator.

ON CAMPUS
TypeDescriptionValue
Laboratory Work ^Laboratory sessions and reports25%
AssignmentProblem sets25%
Examination ^End of semester examination50%

^ Mandatory to Pass


Disability Standards for Education (Commonwealth 2005)

For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.

Assessment

Students please note: The marks and grades received by students on assessments may be subject to further moderation. Informal vivas may be conducted as part of an assessment task, where staff require further information to confirm the learning outcomes have been met. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.

Academic Integrity

Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work as well as any generative artificial intelligence tools that may have been used. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.

Breaches of academic integrity can include:

Plagiarism

Copying the words, ideas or creative works of other people or generative artificial intelligence tools, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).

Unauthorised collaboration (collusion)

Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).

Contract cheating

Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.

Cheating in an exam

Using or having access to unauthorised materials in an exam or test.

Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.

ECU's policies and more information about academic integrity can be found on the student academic integrity website.

All commencing ECU students are required to complete the Academic Integrity Module.

Assessment Extension

In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.

Special Consideration

Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.

ENS5445|4|1

School: Engineering

This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.

  • Unit Title

    Sustainability and Renewable Energy
  • Unit Code

    ENS5445
  • Year

    2024
  • Enrolment Period

    2
  • Version

    4
  • Credit Points

    15
  • Full Year Unit

    N
  • Mode of Delivery

    On Campus
  • Unit Coordinator

    Dr Stefan LACHOWICZ

Description

This unit introduces students to the concepts behind and the design of renewable and efficient electric power systems. First, distributed power generation and its economics are discussed. This is followed by a detailed analysis of the design and operation of wind, photovoltaic, and other renewable power systems. Students will be exposed to the problem of meeting energy demand while implementing strategies to reduce greenhouse gas emissions.

Prerequisite Rule

Only Honours students must pass unit ENS1253. There are no pre-requisites required for students enrolled in the Master of Engineering (I59).

Learning Outcomes

On completion of this unit students should be able to:

  1. Analyse the economic and environmental benefits of utilising sustainable energy resources.
  2. Discuss how distributed electricity generation can be used to reduce greenhouse gas emissions while meeting demands for energy.
  3. Establish guidelines for the design and maintenance of wind and photovoltaic power systems.
  4. Inspect energy efficiency strategies applied to industrial, commercial and residential users of electricity.
  5. Investigate new developments in sustainability and renewable energy and reflect critically on their significance to engineering practice.

Unit Content

  1. Distributed generation technologies, fossil fuels, solar power, biomass for electricity, micro-hydropower, fuel cells.
  2. Economics of distributed resources, electric utility rate structure, energy economics, distributed benefits, integrated resource planning and demand-side management.
  3. Photovoltaic materials and electrical characteristics.
  4. Photovoltaic systems, grid connected systems, stand-alone systems, economics.
  5. Power quality aspects of distributed and renewable generation: voltage regulation problems, interference with the utility fault-clearing process, concerns for islanding, etc.
  6. Review of the electric power industry.
  7. The microgrid as an innovative small-scale distributed generation network and the required power control strategies.
  8. The smart grid paradigm for high penetrations of renewable energy and distributed generation.
  9. The solar resource characteristics.
  10. Wind power systems, types of wind turbines and their characteristics, wind turbine economics.

Learning Experience

Students will attend on campus classes as well as engage in learning activities through ECU's LMS

JoondalupMount LawleySouth West (Bunbury)
Semester 213 x 2 hour labNot OfferedNot Offered
Semester 213 x 2 hour lectureNot OfferedNot Offered
Semester 213 x 1 hour tutorialNot OfferedNot Offered

For more information see the Semester Timetable

Assessment

GS1 GRADING SCHEMA 1 Used for standard coursework units

Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.

Due to the professional competency skill development associated with this Unit, student attendance/participation within listed in-class activities and/or online activities including discussion boards is compulsory. Students failing to meet participation standards as outlined in the unit information may be awarded an I Grade (Fail - incomplete). Students who are unable to meet this requirement for medical or other reasons must seek the approval of the unit coordinator.

ON CAMPUS
TypeDescriptionValue
Laboratory Work ^Laboratory sessions and reports25%
AssignmentProblem sets25%
Examination ^End of semester examination50%

^ Mandatory to Pass


Disability Standards for Education (Commonwealth 2005)

For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.

Assessment

Students please note: The marks and grades received by students on assessments may be subject to further moderation. Informal vivas may be conducted as part of an assessment task, where staff require further information to confirm the learning outcomes have been met. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.

Academic Integrity

Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work as well as any generative artificial intelligence tools that may have been used. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.

Breaches of academic integrity can include:

Plagiarism

Copying the words, ideas or creative works of other people or generative artificial intelligence tools, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).

Unauthorised collaboration (collusion)

Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).

Contract cheating

Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.

Cheating in an exam

Using or having access to unauthorised materials in an exam or test.

Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.

ECU's policies and more information about academic integrity can be found on the student academic integrity website.

All commencing ECU students are required to complete the Academic Integrity Module.

Assessment Extension

In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.

Special Consideration

Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.

ENS5445|4|2