School: Engineering

This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.

Your unit may be subject to government or third party COVID-19 vaccination requirements. Please consider this before enrolling in this unit, and speak with the unit coordinator if this raises any concerns.

  • Unit Title

    Reservoir Engineering
  • Unit Code

    ENS5566
  • Year

    2022
  • Enrolment Period

    1
  • Version

    3
  • Credit Points

    15
  • Full Year Unit

    N
  • Mode of Delivery

    On Campus
    Online
  • Unit Coordinator

    Dr Alireza KESHAVARZ

Description

This unit covers the fundamentals of reservoir engineering and outlines different types of oil/gas reservoirs. It is a core unit of the petroleum engineering discipline. Students will study fluid flow in porous media and learn how to predict reservoir behavior.

Co-Requisite Rule

Must have passed, or be concurrently studying, 1 unit in ENS2270, ENS6202 AND 1 unit in ENS3301, ENS6201

Equivalent Rule

Unit was previously coded {ENS5163}

Learning Outcomes

On completion of this unit students should be able to:

  1. Predict reservoir behaviour based on rock and fluid properties.
  2. Explain fluid flow phenomena in hydrocarbon reservoirs.
  3. Determine initial oil and gas in place and recovery factor using volumetric and material balance techniques.
  4. Model fluid movement in porous media under different fluid regimes, geometries and fluid/rock compressibilities.
  5. Analyse hydrocarbon recovery in relation to appropriate oil/gas drive mechanisms in hydrocarbon reservoirs.

Unit Content

  1. Classification of different types of hydrocarbon reservoirs.
  2. Estimation of hydrocarbon in place, and reserve and recovery factor using volumetric and material balance techniques.
  3. Fluid flow in porous media and Darcy's law.
  4. Reservoir flow systems: steady state, pseudo-steady state, unsteady state, linear, cylindrical and spherical flow models.
  5. Two-phase flow, relative permeability, phase saturation and capillary pressure.
  6. Water flooding, immiscible displacement, fractional flow and sweep efficiency.

Learning Experience

ON-CAMPUS

Students will attend on campus classes as well as engage in learning activities through ECU's LMS

JoondalupMount LawleySouth West (Bunbury)
Semester 113 x 2 hour lectureNot OfferedNot Offered
Semester 113 x 1 hour tutorialNot OfferedNot Offered

For more information see the Semester Timetable

ONLINE

Students will engage in learning experiences via ECU’s LMS as well as additional ECU learning technologies

Assessment

GS1 GRADING SCHEMA 1 Used for standard coursework units

Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.

Due to the professional competency skill development associated with this Unit, student attendance/participation within listed in-class activities and/or online activities including discussion boards is compulsory. Students failing to meet participation standards as outlined in the unit information may be awarded an I Grade (Fail - incomplete). Students who are unable to meet this requirement for medical or other reasons must seek the approval of the unit coordinator.

ON CAMPUS
TypeDescriptionValue
AssignmentTheory exercises 20%
TestMid semester test30%
Examination ^End of semester examination50%
ONLINE
TypeDescriptionValue
AssignmentTheory exercises20%
AssignmentOpen book take home test with viva component30%
Assignment ^Summative assessment of unit content50%

^ Mandatory to Pass


Disability Standards for Education (Commonwealth 2005)

For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.

Academic Integrity

Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.

Breaches of academic integrity can include:

Plagiarism

Copying the words, ideas or creative works of other people, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).

Unauthorised collaboration (collusion)

Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).

Contract cheating

Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.

Cheating in an exam

Using or having access to unauthorised materials in an exam or test.

Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.

ECU's policies and more information about academic integrity can be found on the student academic integrity website.

All commencing ECU students are required to complete the Academic Integrity Module.

Assessment Extension

In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.

Special Consideration

Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.

ENS5566|3|1

School: Engineering

This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.

Your unit may be subject to government or third party COVID-19 vaccination requirements. Please consider this before enrolling in this unit, and speak with the unit coordinator if this raises any concerns.

  • Unit Title

    Reservoir Engineering
  • Unit Code

    ENS5566
  • Year

    2022
  • Enrolment Period

    2
  • Version

    3
  • Credit Points

    15
  • Full Year Unit

    N
  • Mode of Delivery

    On Campus
    Online
  • Unit Coordinator

    Dr Alireza KESHAVARZ

Description

This unit covers the fundamentals of reservoir engineering and outlines different types of oil/gas reservoirs. It is a core unit of the petroleum engineering discipline. Students will study fluid flow in porous media and learn how to predict reservoir behavior.

Co-Requisite Rule

Must have passed, or be concurrently studying, 1 unit in ENS2270, ENS6202 AND 1 unit in ENS3301, ENS6201

Equivalent Rule

Unit was previously coded {ENS5163}

Learning Outcomes

On completion of this unit students should be able to:

  1. Predict reservoir behaviour based on rock and fluid properties.
  2. Explain fluid flow phenomena in hydrocarbon reservoirs.
  3. Determine initial oil and gas in place and recovery factor using volumetric and material balance techniques.
  4. Model fluid movement in porous media under different fluid regimes, geometries and fluid/rock compressibilities.
  5. Analyse hydrocarbon recovery in relation to appropriate oil/gas drive mechanisms in hydrocarbon reservoirs.

Unit Content

  1. Classification of different types of hydrocarbon reservoirs.
  2. Estimation of hydrocarbon in place, and reserve and recovery factor using volumetric and material balance techniques.
  3. Fluid flow in porous media and Darcy's law.
  4. Reservoir flow systems: steady state, pseudo-steady state, unsteady state, linear, cylindrical and spherical flow models.
  5. Two-phase flow, relative permeability, phase saturation and capillary pressure.
  6. Water flooding, immiscible displacement, fractional flow and sweep efficiency.

Learning Experience

ON-CAMPUS

Students will attend on campus classes as well as engage in learning activities through ECU's LMS

JoondalupMount LawleySouth West (Bunbury)
Semester 113 x 2 hour lectureNot OfferedNot Offered
Semester 113 x 1 hour tutorialNot OfferedNot Offered

For more information see the Semester Timetable

ONLINE

Students will engage in learning experiences via ECU’s LMS as well as additional ECU learning technologies

Assessment

GS1 GRADING SCHEMA 1 Used for standard coursework units

Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.

Due to the professional competency skill development associated with this Unit, student attendance/participation within listed in-class activities and/or online activities including discussion boards is compulsory. Students failing to meet participation standards as outlined in the unit information may be awarded an I Grade (Fail - incomplete). Students who are unable to meet this requirement for medical or other reasons must seek the approval of the unit coordinator.

ON CAMPUS
TypeDescriptionValue
AssignmentTheory exercises 20%
TestMid semester test30%
Examination ^End of semester examination50%
ONLINE
TypeDescriptionValue
AssignmentTheory exercises20%
AssignmentOpen book take home test with viva component30%
Assignment ^Summative assessment of unit content50%

^ Mandatory to Pass


Disability Standards for Education (Commonwealth 2005)

For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.

Academic Integrity

Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.

Breaches of academic integrity can include:

Plagiarism

Copying the words, ideas or creative works of other people, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).

Unauthorised collaboration (collusion)

Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).

Contract cheating

Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.

Cheating in an exam

Using or having access to unauthorised materials in an exam or test.

Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.

ECU's policies and more information about academic integrity can be found on the student academic integrity website.

All commencing ECU students are required to complete the Academic Integrity Module.

Assessment Extension

In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.

Special Consideration

Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.

ENS5566|3|2