Visit ECU Homepage
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
Your unit may be subject to government or third party COVID-19 vaccination requirements. Please consider this before enrolling in this unit, and speak with the unit coordinator if this raises any concerns.
This is one of three practical units specializing in occupational hygiene. In this unit students will develop skills in the design and assessment of controls for physical, chemical and biological hazards in the workplace. The unit focuses on the use of the hierarchy of control, with a special emphasis on engineering controls, as well as administrative measures and personal protective equipment (PPE). These skills are fundamental for practitioner wanting to undertake roles in the field of occupational hygiene. Students are required to utilise and synthesize a range of information sources including scientific literature legislation, standards and guidelines, when making decisions about the outcomes of an assessment. They will have the opportunity to use a range of the occupational hygiene equipment in the field.
All students will be required to participate in a 3 day workshop held at Joondalup campus to develop practical skills.
Unit was previously coded HST5162
On completion of this unit students should be able to:
Students will engage in learning experiences via ECU’s LMS as well as additional ECU learning technologies
In this unit, students complete learning modules online and are required to participate in online tutorials and discussion groups. There is a compulsory 3 day workshop to be attended on campus at a specified time, where students will refine their practical skills in the assessment of ventilation and noise controls. Students will produce a report on the practical findings of the hazard control assessment activities undertaken during the intensive on campus workshop.
GS1 GRADING SCHEMA 1 Used for standard coursework units
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
| Type | Description | Value |
|---|---|---|
| Case Study | Hierarchy of control case analysis | 30% |
| Test | Online test | 30% |
| Report | Hazard control monitoring and evaluation | 40% |
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.
Breaches of academic integrity can include:
Copying the words, ideas or creative works of other people, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).
Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).
Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.
Using or having access to unauthorised materials in an exam or test.
Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.
ECU's policies and more information about academic integrity can be found on the student academic integrity website.
All commencing ECU students are required to complete the Academic Integrity Module.
In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.
Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.
OHS6162|3|1
This unit information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.
Your unit may be subject to government or third party COVID-19 vaccination requirements. Please consider this before enrolling in this unit, and speak with the unit coordinator if this raises any concerns.
This is one of three practical units specializing in occupational hygiene. In this unit students will develop skills in the design and assessment of controls for physical, chemical and biological hazards in the workplace. The unit focuses on the use of the hierarchy of control, with a special emphasis on engineering controls, as well as administrative measures and personal protective equipment (PPE). These skills are fundamental for practitioner wanting to undertake roles in the field of occupational hygiene. Students are required to utilise and synthesize a range of information sources including scientific literature legislation, standards and guidelines, when making decisions about the outcomes of an assessment. They will have the opportunity to use a range of the occupational hygiene equipment in the field.
All students will be required to participate in a 3 day workshop held at Joondalup campus to develop practical skills.
Unit was previously coded HST5162
On completion of this unit students should be able to:
Students will engage in learning experiences via ECU’s LMS as well as additional ECU learning technologies
In this unit, students complete learning modules online and are required to participate in online tutorials and discussion groups. There is a compulsory 3 day workshop to be attended on campus at a specified time, where students will refine their practical skills in the assessment of ventilation and noise controls. Students will produce a report on the practical findings of the hazard control assessment activities undertaken during the intensive on campus workshop.
GS1 GRADING SCHEMA 1 Used for standard coursework units
Students please note: The marks and grades received by students on assessments may be subject to further moderation. All marks and grades are to be considered provisional until endorsed by the relevant School Progression Panel.
| Type | Description | Value |
|---|---|---|
| Case Study | Hierarchy of control case analysis | 30% |
| Test | Online test | 30% |
| Report | Hazard control monitoring and evaluation | 40% |
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Access and Inclusion website.
Integrity is a core value at Edith Cowan University, and it is expected that ECU students complete their assessment tasks honestly and with acknowledgement of other people's work. This means that assessment tasks must be completed individually (unless it is an authorised group assessment task) and any sources used must be referenced.
Breaches of academic integrity can include:
Copying the words, ideas or creative works of other people, without referencing in accordance with stated University requirements. Students need to seek approval from the Unit Coordinator within the first week of study if they intend to use some of their previous work in an assessment task (self-plagiarism).
Working with other students and submitting the same or substantially similar work or portions of work when an individual submission was required. This includes students knowingly providing others with copies of their own work to use in the same or similar assessment task(s).
Organising a friend, a family member, another student or an external person or organisation (e.g. through an online website) to complete or substantially edit or refine part or all of an assessment task(s) on their behalf.
Using or having access to unauthorised materials in an exam or test.
Serious outcomes may be imposed if a student is found to have committed one of these breaches, up to and including expulsion from the University for repeated or serious acts.
ECU's policies and more information about academic integrity can be found on the student academic integrity website.
All commencing ECU students are required to complete the Academic Integrity Module.
In some circumstances, Students may apply to their Unit Coordinator to extend the due date of their Assessment Task(s) in accordance with ECU's Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000001386.
Students may apply for Special Consideration in respect of a final unit grade, where their achievement was affected by Exceptional Circumstances as set out in the Assessment, Examination and Moderation Procedures - for more information visit https://askus2.ecu.edu.au/s/article/000003318.
OHS6162|3|2