Top of page

Student/Staff Portal
Global Site Navigation

School of Engineering

Local Section Navigation
You are here: Main Content
  • Dr Ana Vafadar

    Dr Ana Vafadar

Related Contents

Dr Ana Vafadar

Senior Lecturer

Staff Member Details
Telephone: +61 8 6304 4685
Facsimile: +61 8 6304 5811
Email: a.vafadar@ecu.edu.au
Campus: Joondalup  
Room: JO5.224  
ORCID iD: https://orcid.org/0000-0002-7697-6443

Ana is a Senior Lecturer and Researcher of Mechanical Engineering in the School of Engineering.

Current teaching

  • ENM1102   Engineering Drawing and Computer Aided Design
  • ENS2170/ENS6138 Principles of Industrial Maintenance
  • ENS2214/ENS6105 Computer Aided Design and Manufacturing

Awards and recognition

  • 2020: ECU Vice-Chancellor’s Staff Excellence Award - Innovative Teaching

Research areas and interests

  • Mechanical Design and Manufacturing Processes
  • Computer Aided Design and Manufacturing (CAD/CAM)
  • Additive Manufacturing
  • Topology Optimization
  • Cost Analysis and Decision Making Models
  • Optimisation Processes
  • Hydraulic and Pneumatic Systems

Qualifications

  • Doctor of Philosophy, Edith Cowan University, 2017.

Research Outputs

2024

Journal Articles

  • Hurry, A., Vafadarshamasbi, A., Hayward, K., Guzzomi, N., Rauthan, K. (2024). Numerical investigation of the thermo-hydraulic performance of a shark denticle-inspired plate fin heat exchanger. Applied Thermal Engineering, 239(Article in press), Article number 122192. https://doi.org/https://doi.org/10.1016/j.applthermaleng.2023.122192.
  • Makhesana, MA., Vesuwala, H., Patel, KM., Vafadarshamasbi, A., Sarikaya, M., Khanna, N. (2024). Assessing the cooling/lubricating agencies for sustainable alternatives during machining of Nimonic 80: Economic and environmental impacts. Heliyon, 10(8), article number e29238. https://doi.org/10.1016/j.heliyon.2024.e29238.
  • Yasmin, F., Vafadarshamasbi, A., Tolouei Rad, M. (2024). Application of Additive Manufacturing in the Development of Polymeric Bioresorbable Cardiovascular Stents: A Review. Advanced Materials Technologies, 2024(Article in press), Article number 2400210. https://doi.org/https://doi.org/10.1002/admt.202400210.

2023

Journal Articles

  • Hurry, A., Hayward, K., Guzzomi, N., Rauthan, K., Vafadarshamasbi, A. (2023). Thermo-hydraulic performance evaluation of a NACA 63-015 heat exchanger with shark denticles as surface textures. International Journal of Heat and Mass Transfer, 216(Article in press), Article number 124591. https://doi.org/https://doi.org/10.1016/j.ijheatmasstransfer.2023.124591.
  • Jones, J., Vafadarshamasbi, A., Hashemi, R. (2023). A Review of the Mechanical Properties of 17-4PH Stainless Steel Produced by Bound Powder Extrusion. Journal of Manufacturing and Materials Processing, 7(5), Article number 162. https://doi.org/https://doi.org/10.3390/jmmp7050162.
  • Perera, P., Hayward, K., Guzzomi, N., Vafadarshamasbi, A. (2023). Erosion wear characterisation of an open Ductile Iron butterfly valve subjected to Aluminium Oxide particle slurry flow. Tribology International, 191(Article in press), Article number 109199. https://doi.org/10.1016/j.triboint.2023.109199.

2022

Book Chapters

  • Llanto, J., Vafadarshamasbi, A., Tolouei Rad, M. (2022). Multi-objective Optimisation in Abrasive Waterjet Contour Cutting of AISI 304L. Production Engineering and Robust Control (35). Intech Open. https://doi.org/10.5772/intechopen.106817.

2021

Journal Articles

  • Llanto, J., Tolouei Rad, M., Vafadarshamasbi, A., Aamir, M. (2021). Impacts of Traverse Speed and Material Thickness on Abrasive Waterjet Contour Cutting of Austenitic Stainless Steel AISI 304L. Applied Sciences, 11(11), Article number 4925. https://doi.org/10.3390/app11114925.
  • Vafadarshamasbi, A., Guzzomi, N., Rassau, A., Hayward, K. (2021). Advances in Metal Additive Manufacturing: A Review of Common Processes, Industrial Applications, and Current Challenges. Applied Sciences, 11(3), Article number 1213. https://doi.org/10.3390/app11031213.
  • Vafadarshamasbi, A., Guzzomi, N., Hayward, K. (2021). Experimental Investigation and Comparison of the Thermal Performance of Additively and Conventionally Manufactured Heat Exchangers. Metals, 11(4), Article number 574. https://doi.org/10.3390/met11040574.
  • Llanto, J., Vafadarshamasbi, A., Aamir, M., Tolouei Rad, M. (2021). Analysis and Optimization of Process Parameters in Abrasive Waterjet Contour Cutting of AISI 304L. Metals, 11(9), Article number 1362. https://doi.org/10.3390/met11091362.
  • Khanna, N., Zadafiya, K., Patel, T., Kaynak, Y., Rashid, R., Vafadarshamasbi, A. (2021). Review on machining of additively manufactured Nickel and Titanium alloys. Journal of Materials Research and Technology, 15(November–December 2021), 3192-3221. https://doi.org/10.1016/j.jmrt.2021.09.088.
  • Ali, S., Ahmad, F., Akhtar, K., Habib, N., Aamir, M., Giasin, K., Vafadarshamasbi, A., Pimenov, D. (2021). Numerical Investigation of Microchannel Heat Sink with Trefoil Shape Ribs. Energies, 14(20), Article number 6764. https://doi.org/10.3390/en14206764.
  • Llanto, J., Tolouei Rad, M., Vafadarshamasbi, A., Aamir, M. (2021). Recent Progress Trend on Abrasive Waterjet Cutting of Metallic Materials: A Review. Applied Sciences, 11(8), Article number 3344. https://doi.org/10.3390/app11083344.
  • Rauthan, K., Guzzomi, N., Vafadarshamasbi, A., Hayward, K., Hurry, A. (2021). Experimental Investigation of Pressure Drop Performance of Smooth and Dimpled Single Plate-Fin Heat Exchangers. Metals, 11(11), Article number 1757. https://doi.org/10.3390/met11111757.
  • Aamir, M., Tolouei Rad, M., Giasin , K., Vafadarshamasbi, A., Koklu , U., Keeble , W. (2021). Evaluation of the Surface Defects and Dimensional Tolerances in Multi-Hole Drilling of AA5083, AA6061, and AA2024. Applied Sciences, 11(9), Article number 4285. https://doi.org/10.3390/app11094285.
  • Aamir, M., Davis, A., Keeble , W., Koklu , U., Giasin , K., Vafadarshamasbi, A., Tolouei Rad, M. (2021). The Effect of TiN-, TiCN-, TiAlN-, and TiSiN Coated Tools on the Surface Defects and Geometric Tolerances of Holes in Multi-Spindle Drilling of Al2024 Alloy. Metals, 11(7), Article number 1103. https://doi.org/10.3390/met11071103.

2020

Journal Articles

  • Aamir, M., Tolouei Rad, M., Giasin, K., Vafadarshamasbi, A. (2020). Machinability of Al2024, Al6061, and Al5083 alloys using multi-hole simultaneous drilling approach. Journal of Materials Research and Technology, 9(5), 10991-11002. https://doi.org/10.1016/j.jmrt.2020.07.078.
  • Aamir, M., Giasin, K., Tolouei Rad, M., Vafadarshamasbi, A. (2020). A review: drilling performance and hole quality of aluminium alloys for aerospace applications. Journal of Materials Research and Technology, 9(6), 12484-12500. https://doi.org/10.1016/j.jmrt.2020.09.003.
  • Aamir, M., Tolouei Rad, M., Giasin, K., Vafadarshamasbi, A. (2020). Feasibility of tool configuration and the effect of tool material, and tool geometry in multi-hole simultaneous drilling of Al2024. International Journal of Advanced Manufacturing Technology, 111(3-4), 861–879. https://doi.org/10.1007/s00170-020-06151-7.
  • Aamir, M., Tu, S., Tolouei Rad, M., Giasin, K., Vafadarshamasbi, A. (2020). Optimization and modeling of process parameters in multi-hole simultaneous drilling using taguchi method and fuzzy logic approach. Materials, 13(3), Article number 680. https://doi.org/10.3390/ma13030680.
  • Aamir, M., Tolouei Rad, M., Vafadarshamasbi, A., Raja, N., Giasin, K. (2020). Performance Analysis of Multi-Spindle Drilling of Al2024 with TiN and TiCN Coated Drills Using Experimental and Artificial Neural Networks Technique. Applied Sciences, 10(23), Article number 8633. https://doi.org/10.3390/app10238633.

2019

Journal Articles

  • Vafadarshamasbi, A., Tolouei Rad, M., Hayward, K. (2019). An integrated model to use drilling modular machine tools. International Journal of Advanced Manufacturing Technology, 102(5-8), 2387-2397. https://doi.org/10.1007/s00170-019-03387-w.
  • Aamir, M., Tolouei Rad, M., Ud Din, I., Giasin, K., Vafadarshamasbi, A. (2019). Performance of SAC305 and SAC305-0.4La lead free electronic solders at high temperature. Soldering and Surface Mount Technology, 31(4), 250-260. https://doi.org/10.1108/SSMT-01-2019-0001.
  • Masoudi, S., Mirabdolahi, M., Dayyani, M., Jafarian, F., Vafadarshamasbi, A., Dorali, MR. (2019). Development of an intelligent model to optimize heat-affected zone, kerf, and roughness in 309 stainless steel plasma cutting by using experimental results. Materials and Manufacturing Processes, 34(3), 345-356. https://doi.org/10.1080/10426914.2018.1532579.

2018

Journal Articles

  • Masoudi, S., Vafadarshamasbi, A., Hadad, M., Jafarian, F. (2018). Experimental investigation into the effects of nozzle position, workpiece hardness, and tool type in MQL turning of AISI 1045 steel. Materials and Manufacturing Processes, 33(9), 1011-1019. https://doi.org/10.1080/10426914.2017.1401716.

2017

Journal Articles

  • Masoudi, S., Gholami, M., Janghorban Lariche, M., Vafadarshamasbi, A. (2017). Infrared temperature measurement and increasing infrared measurement accuracy in the context of machining process. Advances in Production Engineering and Management, 12(4), 353-362. https://doi.org/10.14743/apem2017.4.263.
  • Vafadarshamasbi, A., Hayward, K., Tolouei Rad, M. (2017). Sensitivity analysis for justification of utilising special purpose machine tools in the presence of uncertain parameters. International Journal of Production Research, 55(13), 3842-3861. https://doi.org/10.1080/00207543.2017.1308032.
  • Vafadarshamasbi, A., Hayward, K., Tolouei Rad, M. (2017). Drilling reconfigurable machine tool selection and process parameters optimization as a function of product demand. Journal of Manufacturing Systems, 45(August 2017), 58-69. https://doi.org/10.1016/j.jmsy.2017.08.004.

Conference Publications

  • Vafadarshamasbi, A., Tolouei Rad, M., Hayward, K. (2017). Evaluation of the effect of product demand uncertainty on manufacturing system selection. Procedia Manufacturing (1735-1743). Elsevier. https://doi.org/10.1016/j.promfg.2017.07.301.

2016

Journal Articles

  • Vafadarshamasbi, A., Tolouei Rad, M., Hayward, K., Abhary, K. (2016). Technical feasibility analysis of utilizing special purpose machine tools. Journal of Manufacturing Systems, 39(2016), 53–62. https://doi.org/10.1016/j.jmsy.2016.02.003.
  • Vafadarshamasbi, A., Tolouei Rad, M., Hayward, K. (2016). New cost model for feasibility analysis of utilising special purpose machine tools. International Journal of Production Research, 54(24), 7330-7344. https://doi.org/10.1080/00207543.2016.1181283.

Research Projects

  • Innovative Digital Insulin Transdermal Delivery System for Type 2 Diabetes Management, Department of Health WA, Future Health Research and Innovation Fund - Innovative Solutions - Digital Health, 2024 ‑ 2025, $100,000.
  • Application of Advanced Manufacturing to the Development of High Efficiency Heat Exchangers , Edith Cowan University, ECU Early Career Researcher Grant - 2019, 2019 ‑ 2020, $30,000.

Research Student Supervision

Current Supervisions

Principal Supervisor

  • Doctor of Philosophy, Design and development of an additive friction stir deposition (AFSD) tool with enhanced performance
  • Doctor of Philosophy, OPTIMISATION OF THE BUTTERFLY VALVE DISC TO IMPROVE SERVICE LIFE AND MINIMISE EROSION

Co-principal Supervisor

  • Doctor of Philosophy, The underutilisation of general-purpose metal additive manufacturing leading to an alternative consumable

Associate Supervisor

  • Doctor of Philosophy, 4D-printing of a customized self-expandable cardiovascular stent using a negative Poisson’s ratio structure
  • Doctor of Philosophy, Mechanical and low-cycle fatigue performance of polymeric bone scaffolds

Completed Supervisions

Principal Supervisor

  • Doctor of Philosophy, Biomimicry for the shape optimisation of heat exchangers: Exploring hydrodynamic profiles inspired by shark denticles

Co-principal Supervisor

  • Master of Engineering Science, Investigation of Surface Textures on Thermal and Pressure Drop Performance of Plate-Fin Heat Exchangers

Associate Supervisor

  • Master of Engineering Science, Optimisation of process parameters in abrasive water jet contour cutting of AISI 304L
  • Doctor of Philosophy, Simultaneous machining of aerospace structural materials using poly-drills
Skip to top of page