Top of page

Student/Staff Portal
Global Site Navigation

School of Engineering

Local Section Navigation
You are here: Main Content
  • Dr Muhammad Aamir

    Dr Muhammad Aamir

Related Contents

Dr Muhammad Aamir

Technical Support Engineer

Staff Member Details
Email: m.aamir@ecu.edu.au
Campus: Joondalup  
Room: JO5.109  
ORCID iD: https://orcid.org/0000-0003-0733-919X

Dr Muhammad Aamir is a Technical Support Engineer in the School of Engineering. He has a vast experience in academics, research, and administration.

Awards and recognition

  • 2021: School of Engineering Research Medal in PhD, Edith Cowan University, Australia
  • 2018: Higher Degree Research Scholarship, Edith Cowan University, Australia
  • 2016: University Gold Medal in MSc, CECOS University, Pakistan
  • 2012: Best Staff award, CECOS University, Pakistan

Research areas and interests

  • Advanced manufacturing.
  • Machining aerospace structural materials.
  • Characterization of materials.
  • Optimization processes.

Other professional activities

Qualifications

  • Doctor of Philosophy, Edith Cowan University, 2021.

Research Outputs

2023

Journal Articles

  • Habib , T., Omair, M., Habib, MS., Zahir , MZ., Khattak , SB., Yook, S., Aamir, M., Akhtar, R. (2023). Modular Product Architecture for Sustainable Flexible Manufacturing in Industry 4.0: The Case of 3D Printer and Electric Toothbrush. Applied Sciences, 15(2), Article number 910. https://doi.org/10.3390/su15020910.
  • Akhtar , K., Ali, H., Ud Din , I., Abbas, A., Zahir , MZ., Ahmad , F., Alam , F., Shah , N., Aamir, M. (2023). Heat Transfer Augmentation and Entropy Generation Analysis of Microchannel Heat Sink (MCHS) with Symmetrical Ogive-Shaped Ribs. Energies, 16(6), Article number 2783. https://doi.org/10.3390/en16062783.
  • Ercetin, A., Özgün , ., Aslantaş , K., Der , O., Yalçın , B., Şimşir , E., Aamir, M. (2023). Microstructural and Mechanical Behavior Investigations of Nb-Reinforced Mg–Sn–Al–Zn–Mn Matrix Magnesium Composites. Metals, 13(6), Article number 1097. https://doi.org/10.3390/met13061097.
  • Aamir, M., Sharif , A., Zahir, MZ., Giasin , K., Tolouei Rad, M. (2023). Experimental Assessment of Hole Quality and Tool Condition in the Machining of an Aerospace Alloy. Machines, 11(7), Article number 726. https://doi.org/10.3390/machines11070726.
  • Bakhtiari, H., Aamir, M., Tolouei Rad, M. (2023). Effect of 3D Printing Parameters on the Fatigue Properties of Parts Manufactured by Fused Filament Fabrication: A Review. Applied Sciences, 13(2), Article number 904. https://doi.org/10.3390/app13020904.

2022

Journal Articles

  • Khan, AH., Shah , SA., Umar , F., Noor, U., Gul , RM., Giasin , K., Aamir, M. (2022). Investigating the Microstructural and Mechanical Properties of Novel Ternary Reinforced AA7075 Hybrid Metal Matrix Composite. Materials, 15(15), article number 5303. https://doi.org/10.3390/ma15155303.
  • Qayyum, H., Hussain, G., Sulaiman , M., Hassan , M., Ali , A., Muhammad, R., Wei, H., Shehbaz , T., Aamir, M., Altaf, K. (2022). Effect of Raster Angle and Infill Pattern on the In-Plane and Edgewise Flexural Properties of Fused Filament Fabricated Acrylonitrile–Butadiene–Styrene. Applied Sciences, 12(24), Article number 12690. https://doi.org/10.3390/app122412690.
  • Habib, N., Sharif , A., Hussain , A., Aamir, M., Giasin , K., Yurievich Pimenov , D. (2022). Assessment of Hole Quality, Thermal Analysis, and Chip Formation during Dry Drilling Process of Gray Cast Iron ASTM A48. Eng, 3(3), 301-310. https://doi.org/10.3390/eng3030022.
  • Nawaz, A., Ahmad, I., Akram , W., Islam , B., Pimenov, DY., Giasin, K., Aamir, M. (2022). One Factor at a Time Analysis to Modify Potting Technique for Manufacturing of Bubble-Free High-Voltage Polyester Insulated Automotive Coils. Designs, 6(3), Article number 44. https://doi.org/10.3390/designs6030044.
  • Ali , M., Ratlamwala , TA., Hussain, G., Shehbaz , T., Muhammad, R., Aamir, M., Giasin, K., Pimenov, DY. (2022). Machining of Carbon Steel under Aqueous Environment: Investigations into Some Performance Measures. Coatings, 12(8), Article number 1203. https://doi.org/10.3390/coatings12081203.
  • Demirsöz, R., Yasar, N., Korkmaz, ME., Günay, M., Giasin, K., Pimenov, DY., Aamir, M., Unal, H. (2022). Evaluation of the Mechanical Properties and Drilling of Glass Bead/Fiber-Reinforced Polyamide 66 (PA66)-Based Hybrid Polymer Composites. Materials, 15(8), Article Number 2765. https://doi.org/10.3390/ma15082765.

2021

Book Chapters

  • Iqbal, M., Nauman , M., Khan, F., Iqbal, A., Aamir, M., Abas, AE., Cheok, Q. (2021). Vibration-Based Piezoelectric Energy Harvester for Wireless Sensor Node Application. Functional Reverse Engineering of Strategic and Non-Strategic Machine Tools (97-114). CRC Press. https://doi.org/10.1201/9780367808235-9.
  • Tolouei Rad, M., Aamir, M. (2021). Analysis of the Performance of Drilling Operations for Improving Productivity. Drilling Technology (1-16). IntechOpen. https://doi.org/10.5772/intechopen.96497.

Journal Articles

  • Hassan , A., Khan , R., Khan , N., Aamir, M., Pimenov , DY., Giasin, K. (2021). Effect of Seawater Ageing on Fracture Toughness of Stitched Glass Fiber/Epoxy Laminates for Marine Applications. Journal of Marine Science and Engineering, 9(2), Article number 196. https://doi.org/10.3390/jmse9020196.
  • Syreyshchikova , N., Pimenov , D., Yaroslavova , E., Gupta, M., Aamir, M., Giasin, K. (2021). Managing Risks in the Improved Model of Rolling Mill Loading: A Case Study. Journal of Risk and Financial Management, 14(8), Article number 359. https://doi.org/10.3390/jrfm14080359.
  • Aamir, M., Giasin , K., Tolouei Rad, M., Ud Din, I., Hanif , M., Kuklu , U., Pimenov, D., Ikhlaq, M. (2021). Effect of Cutting Parameters and Tool Geometry on the Performance Analysis of One-Shot Drilling Process of AA2024-T3. Metals, 11(6), Article number 854. https://doi.org/10.3390/met11060854.
  • Llanto, J., Tolouei Rad, M., Vafadarshamasbi, A., Aamir, M. (2021). Recent Progress Trend on Abrasive Waterjet Cutting of Metallic Materials: A Review. Applied Sciences, 11(8), Article number 3344. https://doi.org/10.3390/app11083344.
  • Akkoyun , F., Ercetin , A., Aslantas , K., Pimenov, D., Giasin , K., Lakshmikanthan, A., Aamir, M. (2021). Measurement of Micro Burr and Slot Widths through Image Processing: Comparison of Manual and Automated Measurements in Micro-Milling. Sensors, 21(13), Article number 4432. https://doi.org/10.3390/s21134432.
  • Llanto, J., Vafadarshamasbi, A., Aamir, M., Tolouei Rad, M. (2021). Analysis and Optimization of Process Parameters in Abrasive Waterjet Contour Cutting of AISI 304L. Metals, 11(9), Article number 1362. https://doi.org/10.3390/met11091362.
  • Aamir, M., Davis, A., Keeble , W., Koklu , U., Giasin , K., Vafadarshamasbi, A., Tolouei Rad, M. (2021). The Effect of TiN-, TiCN-, TiAlN-, and TiSiN Coated Tools on the Surface Defects and Geometric Tolerances of Holes in Multi-Spindle Drilling of Al2024 Alloy. Metals, 11(7), Article number 1103. https://doi.org/10.3390/met11071103.
  • Aamir, M., Tolouei Rad, M., Giasin, K. (2021). Multi-spindle drilling of Al2024 alloy and the effect of TiAlN and TiSiN-coated carbide drills for productivity improvement. International Journal of Advanced Manufacturing Technology, 114(9-10), 3047–3056. https://doi.org/10.1007/s00170-021-07082-7.
  • Ali, S., Ahmad, F., Akhtar, K., Habib, N., Aamir, M., Giasin, K., Vafadarshamasbi, A., Pimenov, D. (2021). Numerical Investigation of Microchannel Heat Sink with Trefoil Shape Ribs. Energies, 14(20), Article number 6764. https://doi.org/10.3390/en14206764.
  • Habib, N., Sharif, A., Hussain, A., Aamir, M., Giasin , K., Pimenov, D., Ali, U. (2021). Analysis of Hole Quality and Chips Formation in the Dry Drilling Process of Al7075-T6. Metals, 11(6), Article number 891. https://doi.org/10.3390/met11060891.
  • Syreyshchikova, N., Pimenov, D., Gupta, M., Nadolny , K., Giasin , K., Aamir, M., Sharma, S. (2021). Relationship between Pressure and Output Parameters in Belt Grinding of Steels and Nickel Alloy. Materials, 14(16), Article number 4704. https://doi.org/10.3390/ma14164704.
  • Koklu , U., Morkavuk, S., Featherston, C., Haddad, M., Sanders, D., Aamir, M., Pimenov, D., Giasin , K. (2021). The effect of cryogenic machining of S2 glass fibre composite on the hole form and dimensional tolerances. International Journal of Advanced Manufacturing Technology, 115(1-2), 125–140. https://doi.org/10.1007/s00170-021-07150-y.
  • Aamir, M., Tolouei Rad, M., Giasin , K., Vafadarshamasbi, A., Koklu , U., Keeble , W. (2021). Evaluation of the Surface Defects and Dimensional Tolerances in Multi-Hole Drilling of AA5083, AA6061, and AA2024. Applied Sciences, 11(9), Article number 4285. https://doi.org/10.3390/app11094285.
  • Llanto, J., Tolouei Rad, M., Vafadarshamasbi, A., Aamir, M. (2021). Impacts of Traverse Speed and Material Thickness on Abrasive Waterjet Contour Cutting of Austenitic Stainless Steel AISI 304L. Applied Sciences, 11(11), Article number 4925. https://doi.org/10.3390/app11114925.
  • Ali, U., Khan , H., Aamir, M., Giasin , K., Habib, N., Awan, M. (2021). Analysis of Microstructure and Mechanical Properties of Bismuth-Doped SAC305 Lead-Free Solder Alloy at High Temperature. Metals, 11(7), Article number 1077. https://doi.org/10.3390/met11071077.

Conference Publications

  • Sagheer, F., Aamir, M., Sadiq, M. (2021). Mechanical properties of Sn-3.5Ag-0.5La lead-free solder alloy for green electronics. Seventh International Conference on Aerospace Science and Engineering (ICASE 2021) (131-134). IEEE. https://doi.org/10.1109/ICASE54940.2021.9904081.

2020

Journal Articles

  • Aamir, M., Tolouei Rad, M., Vafadarshamasbi, A., Raja, N., Giasin, K. (2020). Performance Analysis of Multi-Spindle Drilling of Al2024 with TiN and TiCN Coated Drills Using Experimental and Artificial Neural Networks Technique. Applied Sciences, 10(23), Article number 8633. https://doi.org/10.3390/app10238633.
  • Liu, M., Tu, S., Xiao, C., Waqas, M., Rehman, Su., Aamir, M., Chang, C. (2020). The Allocation and Reuse Scheme of Physical Cell Identifications Based on Maximum Degree First Coloring Algorithm. IEEE Systems Journal, 14(1), 582 - 591. https://doi.org/10.1109/JSYST.2019.2911273.
  • Ud Din, I., Tu, S., Hao, P., Panier, S., Khan, KA., Umer, R., Shah, S., Franz, G., Aamir, M. (2020). Sequential damage study induced in fiber reinforced composites by shear and tensile stress using a newly developed Arcan fixture. Journal of Materials Research and Technology, 9(6), 13352-13364. https://doi.org/10.1016/j.jmrt.2020.09.067.
  • Ud Din, I., Hao, P., Panier, S., A. Khan, K., Aamir, M., Franz, G., Akhtar, K. (2020). Design of a New Arcan Fixture for In-plane Pure Shear and Combined Normal/Shear Stress Characterization of Fiber Reinforced Polymer Composites. Experimental Techniques: a publication for the practicing engineer, 44(2), 231–240. https://doi.org/10.1007/s40799-019-00353-9.
  • Aamir, M., Tolouei Rad, M., Giasin, K., Vafadarshamasbi, A. (2020). Machinability of Al2024, Al6061, and Al5083 alloys using multi-hole simultaneous drilling approach. Journal of Materials Research and Technology, 9(5), 10991-11002. https://doi.org/10.1016/j.jmrt.2020.07.078.
  • Aamir, M., Tu, S., Giasin, K., Tolouei Rad, M. (2020). Multi-hole simultaneous drilling of aluminium alloy: A preliminary study and evaluation against one-shot drilling process. Journal of Materials Research and Technology, 9(3), 3994-4006. https://doi.org/10.1016/j.jmrt.2020.02.026.
  • Aamir, M., Muhammad, R., Tolouei Rad, M., Giasin, K., Silberschmidt, VV. (2020). A review: microstructure and properties of tin-silver-copper lead-free solder series for the applications of electronics. Soldering and Surface Mount Technology, 32(2), 115-126. https://doi.org/10.1108/SSMT-11-2018-0046.
  • Aamir, M., Giasin, K., Tolouei Rad, M., Vafadarshamasbi, A. (2020). A review: drilling performance and hole quality of aluminium alloys for aerospace applications. Journal of Materials Research and Technology, 9(6), 12484-12500. https://doi.org/10.1016/j.jmrt.2020.09.003.
  • Aamir, M., Tu, S., Tolouei Rad, M., Giasin, K., Vafadarshamasbi, A. (2020). Optimization and modeling of process parameters in multi-hole simultaneous drilling using taguchi method and fuzzy logic approach. Materials, 13(3), Article number 680. https://doi.org/10.3390/ma13030680.
  • Aamir, M., Tolouei Rad, M., Giasin, K., Vafadarshamasbi, A. (2020). Feasibility of tool configuration and the effect of tool material, and tool geometry in multi-hole simultaneous drilling of Al2024. International Journal of Advanced Manufacturing Technology, 111(3-4), 861–879. https://doi.org/10.1007/s00170-020-06151-7.

2019

Journal Articles

  • Aamir, M., Tolouei Rad, M., Giasin, K., Nosrati, A. (2019). Recent advances in drilling of carbon fiber–reinforced polymers for aerospace applications: a review. International Journal of Advanced Manufacturing Technology, 105(5-6), 2289–2308. https://doi.org/10.1007/s00170-019-04348-z.
  • Aamir, M., Tolouei Rad, M., Ud Din, I., Giasin, K., Vafadarshamasbi, A. (2019). Performance of SAC305 and SAC305-0.4La lead free electronic solders at high temperature. Soldering and Surface Mount Technology, 31(4), 250-260. https://doi.org/10.1108/SSMT-01-2019-0001.
  • Hanif, M., Aamir, M., Ahmed, N., Maqsood, S., Muhammad, R., Akhtar, R., Hussain, I. (2019). Optimization of facing process by indigenously developed force dynamometer. International Journal of Advanced Manufacturing Technology, 100(5-8), 1893-1905. https://doi.org/10.1007/s00170-018-2829-5.
  • Ud Din, I., Hao, P., Aamir, M., Franz, G., Panier, S. (2019). FEM Implementation of the Coupled Elastoplastic/Damage Model: Failure Prediction of Fiber Reinforced Polymers (FRPs) Composites. Journal of Solid Mechanics, 11(4), 842-853. https://doi.org/10.22034/JSM.2019.668617.

2018

Journal Articles

  • Tu, S., Waqas, M., Rehman, S., Aamir, M., Rehman, O., Jianbiao, Z., Chang, C. (2018). Security in Fog Computing: A Novel Technique to Tackle an Impersonation Attack. IEEE Access, 6(2018), 74993-75001. https://doi.org/10.1109/ACCESS.2018.2884672.
Skip to top of page